Crane EE-9004, Руководство пользователя

Страница: 23 / 28

23
• Do not pump more than 30 minutes to avoid hurting your breast.
• If you have large breasts, hold and massage gently while pumping milk to help with
the milk flow.
Breast Pump Unit Not Powering On
Check your power outlet by plugging in another electrical device.
• Make sure the power outlet is working.
• Make sure that your AC adaptor is connected properly to the breast pump unit.
• If you are using the AC adaptor and your breast pump is not turning on, try using
the battery power and not the AC Adaptor.
• Make sure battery is fully charged. If it works on the battery power, you might have
a defective AC adaptor.
Milk Overflow Prevention
Your Crane Double Electric Breast Pump is a closed system breast pump, designed
with a barrier so that milk will not enter the tubing. below are some measures you
can take to help avoid milk backflow:
• Adjust the pumping power to a lesser suction level if your breast milk is relatively
abundant.
• Try releasing pressure between your breast and the Silicone 3D cushions if you
notice that the milk is gathering inside the tubing and is not streaming down to the
collection bottle.
• Do not overfill the collection bottle.
Pump Unit Battery Precautions
The li-ion battery is built-in and non-removable. Do not disassemble.
• Only use the included AC adapter as the built-in li-ion polymer battery and power
supply require the specified voltage.
• Do not expose the motor unit to direct sunlight or heat.
• Recharge the pump once a month when not frequently used.
Replacing parts
Your Crane breast pump has been made to our highest standards. However, over
time and multiple uses you may find some of the silicone parts will begin to lose their
elasticity. This may result in reduced suction levels or other problems. Replacement
parts are available to replace any used or degraded parts. Replacement parts can be
purchased directly at www.crane-usa.com