5
ASSEMBLY
CAUTION: Risk of Fire – Do Not Operate Without Legs Attached to Heater!
1.
Before using the heater, attach the feet (included separately) to the unit.
2.
Attach to the base of the heater using the 4 tapping screws provided, taking care
to ensure that they are located correctly in the bottom ends of the heater.
OPERATION AND USE
NOTE:
It is normal for the heater to emit some odor when it is turned on for the first
time or after having not been used for a long period of time. This will disappear when
the heater has been on a short while.
1.
Choose a suitable location for the heater, taking into account the previously
stated safety instructions.
2.
Insert the plug of the heater into a suitable outlet.
3.
Turn the thermostat knob fully in a clockwise direction to the maximum setting.
4.
Turn on the heating elements by means of the rocker switches (750W, 750W) on
the side of the heater. When the heating elements are on, the switches will
illuminate. The heat output for each switch is 750W. For a maximum heat output
of 1500W, both switches should be on.
5.
When the desired room temperature has been reached, the lights on the rocker
switches will turn off. The heater will keep the air temperature in the room at the
set temperature by switching on and off automatically.
6.
When set at minimum (fully counter-clockwise) position (depending on the size of
the room) the heater will maintain the temperature above freezing.
7.
You may turn on the fan to accelerate the heat convection for quick room
warming.
