Crane EE-6917, Быстрый старт

Страница: 8 / 12

6
ASSEMBLY & USE
NOTE: Use the Remote Control to use ALL functions on the humidifier!
ALWAYS use fresh cool water when operating the humidifier.
1. Remove the cover from the water tank, fill water into the water tank directly. Fill
with cool water only.
NOTE: Filtered or distilled water is recommended to avoid
white dust if tap water is too hard.
2.
MAX Water Fill is to the TOP of the clear window on the tank.
DO NOT fill water above the top of the window.
DO NOT use hot water.
DO NOT add any medication, essential oils, or salt to the tank.
(Essential oils should only be used in the aroma tray.)
DO NOT pour water down the Mist Channel.
3. Ensure Mist Nozzle is attached to Cover. Place
COVER on top of water tank, ensuring the
bottom of the cover lines up with the mist
channel in the water tank. Plug cord into
electrical source. All indicator lights will flash once
and beep.
Note: Do not attempt to move the humidifier
while Water Tank is placed on the Humidifier
Base. Doing so may cause leakage of water
and/or Humidifier Base to overfill.
4. Power: Touch to turn power on and Touch and
Hold for 3 seconds to turn the power off. When powered on, the starts on
medium and continuous mist (CO) setting.
5. Adjust Mist Level - Short Press to adjust the mist level to Low, Medium, and High.
6. UV Light : Touch to turn the UV light on and off. UV indicator light is shown on the
display panel when the UV is turned on.
7. Timer : Touch to set the timer in increments of 1 hour from 1-12 hours. The unit will
turn off when the scheduled operating time has elapsed. To Cancel the Timer,
touch and hold the Timer Icon for 3 seconds. Timer indicator light is shown on the
display panel when the timer function is on.
AUTO SHUT OFF: When the humidifier runs out of water, the humidifier will beep 3
times and the unit will stop working. Refill the water the water tank and turn on the
humidifier.
Remote Control Operation
This humidifier includes a remote control to operate ALL functions on the humidifier.
Simply pull the plastic tab before use to activate.
- Turn the power On/Off
% - Press to set the desired humidity between 40%-80%
- Press to adjust the mist level to Low, Medium or High
- Press to turn UV-A light On/Off
- Press to set the timer between 1-12 hours
- Press to turn On/Off color changing night light. Long Press
To turn on Sleep Mode (display turns off). Press again to turn
Display back on.
Note: When programing humidity level and timer function, the
Display panel will flash 5 times to save settings.
The display panel
will revert to the current humidity.