Crane 3800-6 Скачать руководство пользователя страница 82

Страница: 82 / 101

Page

101

MULTIVEND DISCOUNT

•

When MultiVend Discount is set to On all Selections in the Shopping

Cart with 2 or more Items are discounted by the percentage specified.

•

When set to On, the Display will show the message “All selections in a

cart with two or more items will be discounted by the percent

amount specified.

•

This discount applies to all Selections and is not settable by specific

Selections.

•

This discount when On, will be On until it is turned Off, it is not

settable by time of day or days of week.

•

If you want to set specific Selection combinations to be discounted or

discounts by time of day see the Combo Vends or Timed Events Menu

instructions.

Touch the MultiVend Discount Enable Menu Bar to toggle to On.

A Percent Discount Menu Bar will appear. Touch the Menu Bar to change the

Percentage of the Discount.

Use the keypad to enter a new Discount Percentage. Touch Accept when
finished.

PICKER CUP DANCE

•

Touch the Picker Cup Dance Menu Bar to toggle this function On.

•

This feature can help hard to vend products seat better in the cup

during the vend process.

•

When set to On the Picker Cup Dance will cause the Picker Cup to

move down and up during the delivery cycle to insure the Product is

seated in the Picker Cup, and reduces the possibility of the Product

contacting other Products on the way to the Delivery Port.

Содержание 3800-6






































































































Результаты поиска

Содержание 3800-6

Отзывы:

Crane 3800-6, Руководство по программированию, Страница: 82 / 101

Результаты поиска

Содержание 3800-6

Отзывы: