Crane 053749 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 20

Crane 053749 Скачать руководство пользователя страница 11

11

F-3.4) Cord Assemblies:

Power - Reﬁ ll the cooling oil as outlined in paragraph F-1.3.
Make wire connections as outlined in paragraph F-3.3. Insert
female end of cord plug into housing bore aligning timing mark
with hole in terminal block (15) (see Figure 5). Compress cord
plug with compression ﬂ ange (10a) by tightening cap screws (4)
into the motor housing (2). Torque to 132 in-lbs.

SECTION: G REPLACEMENT PARTS

G-1 ORDERING REPLACEMENT PARTS:

When ordering replacement parts, ALWAYS furnish the following

information:

1. Pump serial number and date code. (Paragraph G-4)

2. Pump model number. (Paragraph G-3)

3. Pump part number. (Paragraph G-2)

4. Part description.

5. Item part number.

6. Quantity required.

7. Shipping instructions.

8. Billing Instructions.

G-2 PART NUMBER:

The part number consists of a six (6) digit number, which appears

in the catalog. A one or two letter suﬃ x may follow this number

to designate the design conﬁ guration. This number is used for

ordering and obtaining information.

G-3 MODEL NUMBER:

This designation consists of numbers and letters which represent

the discharge size, series, horsepower, motor phase and voltage,

speed and pump design. This number is used for ordering and

obtaining information.

G-4 SERIAL NUMBER:

The serial number block will consist of a six digit number, which is

speciﬁ c to each pump and may be preceded by a alpha charac-

ter, which indicates the plant location. This number will also be
suﬃ xed with a four digit number, which indicates the date the unit
was built (Date Code).

EXAMPLE: A012345 0490.

Reference the six digit portion (Serial Number) of this number
when referring to the product.

«
...
9
10
11
12
13
...
»

Содержание 053749





















Отзывы:

Нет отзывов