Crane Song avocel, Руководство оператора

Страница: 3 / 16

FIRST TIME POWER UP
The first time that Avocet is powered up, it should be initialized. This is done by pushing
all three output select buttons at the same time. This sets up the remote for proper
operation. It also resets the user settings;
All gains, main and phones are set to zero
Output 1 is the selected output
DAW is the input selected
Phones are set to the Aux input
Take the time to look at the following pages that show how the buttons work. After that,
you are be good to go.
Almost all user selections and gains are remembered by Avocet and restored on power
up. The headphone button and the talk button positions are not remembered
Tha talkback mic gain is adjusted with a small trim pot that is next to the mic’s xlr con-
nector.
AUDIO PATH
The main audio path is discrete class A electronics with a stepped atteunator for gain
control. All switching and gain control functions in the main audio path is done with
relays. Yes they make accoustic clicks when operating.
The headphone audio path is done with high qualitity intergated circuits. The D/A
convertor used the latest technology intergated circuits.
POWERED MONITORS, POWER AMPS WITH NO GAIN CONTROL
Most powered monitors do not have a level control that is meaningfull. This resultes in
the need to trim Avocet’s output gain. In order to do this and not add any amplifier
stages a output pad is supplied. This pad is to be placed at the input of the power amp.
Not at Avocet’s connector. The pad has a range of 10 to 30 db of loss. It is preset to 20
db