Power Safety
-
The unit is supplied with an external power supply and suitable mains lead. Only use the
supplied external power supply, however if you decide to use a mains lead of your
choice, bear in mind the following:
-
Refer to the rating label of the unit and always use a suitable mains cords.
-
The unit should ALWAYS be earthed with the earth on the IEC socket.
-
Please use compliant 60320 C13 TYPE SOCKET. When connecting to supply
outlets ensure that appropriate sized conductors and plugs are used to suit local
electrical requirements.
-
Maximum cord length should be 4.5m (15’)
-
The cord should bear the approval mark of the country it is to be used.
-
Connect only to an AC power source that contains a protective earthing (PE) conductor.
-
Only connect unit to single phase supplies with the neutral conductor at earth potential.
GB
The apparatus shall be connected to mains socket outlets with a protective earthing
connection.
DEN Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til
stikproppens jord.
FIN
Laite on lilettävä sojamaadoituskoskettimilla varustettuun pistorasiaan.
NOR Apparatet må tilkoples jordet stikkontakt.
SWE Apparaten skall anslutas till jordat uttag.
ATTENTION: Un-earthed metal parts may be present inside the enclosure. No
user serviceable parts inside - to be serviced only by qualified personnel.
When servicing, disconnect all power sources before removing any panels.
CE Certification
This unit is CE compliant. Note that any cables supplied with Cranborne Audio
equipment may be fitted with ferrite rings at each end. This is to comply with the
current regulations and these ferrites should not be removed.
FCC Certification
-
Do not modify this unit! This product, when installed as indicated in the instructions
contained in the installation manual, meets FCC requirements.
-
Important: this product satisfies FCC regulations when high quality shielded cables are
used to connect with other equipment. Failure to use high quality shielded cables or to
follow the installation instructions may cause magnetic interference appliances such as
radios televisions and will void your FCC authorisation to use this product in the USA.
-
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance with the instruction
manual may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at their own expense.
500R8
Quick Start Guide
Rev02
-Page 11-
©2021 Cranborne Audio Ltd
