TOURNO pick-up mower
Original Operation Manual English
-7
3.4
Operating elements
1.
Lever for V-belt tensioning
The V-belt may be removed from the V-
belt disk by using the lever. Always secure
the lever by a pin inserted in the bore
holes.
Note!
The pin is included in the supply. (Please
also refer to 3.5.1)
2.
Adjustment lever for setting the mowing height
Push lever slightly to the outside and let it engage at the requested
mowing height.
1 = 30 mm
2 = 45 mm
3 = 50 mm
4 = 65 mm
3.
Adjustment rod for inclination setting
For optimum mulching, the mower should be inclined forward
A1:
For setting, loosen the adjustment rod bolt on one side.
A2:
Release the catch spring from the adjustment rod and pull it slightly
upward.
A3:
Remove the catch spring from its fixture.
A4:
Subsequently turn the adjustment rod until the mower inclines
forward. At the back, the mower should be 2-10 mm higher than at
the front. Subsequently tighten the bolt again.
A1:
Now get the adjustment rod engaged in the catch spring again.
A 1
A 2
A 3
A 4