7
WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other construc-
tion activities contains chemicals known to the State of California to cause cancer,
birth defects or other reproductive harm. Some examples of these chemicals are:
rMFBEGSPNMFBECBTFEQBJOUT
rDSZTUBMMJOFTJMJDBGSPNCSJDLDFNFOUBOEPUIFSNBTPOSZQSPEVDUBOE
r
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well-ventilated area, and work
with approved safety equipment, such as those dust masks that are specially designed
to filter out microscopic particles.
GUARANTEE
This Crain No. 835 Heavy Duty Undercut Saw is guaranteed to be free of defects
in workmanship and quality of materials for a period of one year. Any parts of
this saw found defective subject to the guarantee will be replaced at no charge.
Credit in full or part cannot be extended by the distributor, nor will a new saw
be given as a replacement or loaner. Saws subject to this warranty must be ac-
companied by same, returned freight PREPAID to Milpitas, CA, and must be in
assembled condition.
MAINTENANCE:
If the saw is dropped, the blade guard may be bent or otherwise damaged, restricting
full return. Sawdust that accumulates behind the blade guard can cause it to become
jammed open or closed, especially drywall dust. Check operation of the blade guard
before each use. Do not use the saw if the blade guard does not operate properly.
When not in use, store the saw in the custom carrying case. The saw motor may
run even if the switch malfunctions, causing the motor to not switch off. Do not use
the saw if the switch malfunctions. Repair the switch immediately!
SPECIFICATIONS:
Voltage:
120VAC, 60 HZ.
Construction: Double
Insulated
Plug Type:
2 Pin US Plug
Amperes: 13
Amps
Wattage: 1500
Watts
No Load Speed:
6,500 RPM
Max Depth of Cut:
1
3
⁄
4
"
Max. Height of Cut:
1"
Toe Space Cutting - Minimum Height: 4½"
Gross Weight:
21.5 LBS.
Replacement Blades: #836 Carbide Blade, #805 Masonry Blade, #822 Diamond Blade.
WARNING:
grinding, cutting, or drilling of stone, masonry, brick, concrete, metal,
ceramic tile and other materials with silica in their composition may give off dust or
mists containing crystalline silica. Silica is a basic component of sand, quartz, brick
clay, granite, marble and numerous other minerals and rocks. Inhalation of airborne
crystalline silica can cause serious or fatal respiratory diseases, including silicosis.
Use OSHA and NIOSH approved dust monitoring, dust control, dust collection and
respiratory protection equipment and methods, and follow all applicable regulations.
