4
(Play/Pause) Button to skip to next stored program.
Note:
~ Make sure the volume level of the connected audio player is in high level.
Otherwise, sound level will be weak.
~ If sound is distortion, reduce the volume level or turn off the EQ effects of the
connected audio player.
Press the MODE button repeatedly to select the input source.
Press the RPT (Repeat) button on the Remote Control once to activate random
playback function. "rAn" will shows on the display.
Press the RPT (Repeat) button on the Remote Control twice to plays the current
music repeatedly. "sin" will shows on the display.
Press the RPT (Repeat) button on the Remote Control three times to plays all the
music files in the current folder repeatedly. "FOL" will shows on the display.
Press the RPT (Repeat) button on the Remote Control four times to plays all the
music files in repeatedly. "ALL" will shows on the display.
To cancel all random/repeat playback mode, power off the unit by slide the Power
Switch to off position.
Craig warrants this product to be free from manufacturing defects in material and
workmanship under normal use for a period of 90 days from date of purchase. If
service is required, please return the product to the store where it was purchased
for exchange,or, pack the unit in the original packing material with all accessories
if applicable, a copy of your sales receipt and a Cashier's check or Money Order
for $7.00 (to cover shipping and handling costs) payable to Craig Electronics Inc
For consumers in Canada, please make sure that the cashier check or money
order is redeemable through a U.S. bank. Ship your product freight pre-paid
Your unit will be repaired, replaced or if the unit can not be repaired or replaced,
a refund will be forwarded to you within four weeks of receipt of your unit. Please
ship your unit to:
This warranty is void if the product has been: a) Used in a commercial application
or rental b) Damaged through misuse, negligence, or abuse. c) Modified or repaired
by anyone other than an authorized Craig service center. d) Damaged because it
is improperly connected to any other equipment.
Note: This warranty does not cover: a) Ordinary adjustments as outlined in the
Owner's Manual which can be performed by the customer. b) Damage to equipment
not properly connected to the product. c) Any cost incurred in shipping the product
for repair. d) Damage to the product not used in the USA.
Craig Electronics Inc.
1160 NW 163 Drive
Miami, Fl 33169
LIMITED WARRANTY
This warranty is not transferable and only applies to the original purchase. Any
implied warranties, including the warranty of merchantability, are limited in duration
to the period of this expressed warranty and no warranty whether expressed or
implied shall apply to the product thereafter.
Under no circumstance shall Craig be liable for any loss or consequential damage
arising out of the use of this product. This warranty gives specific legal rights.
However, you may have other rights which may vary from state to state. Some
states do not allow limitations on implied warranties or exclusion of consequential
damage. Therefore, these restrictions may not apply to you.
To Obtain Service on your Product
email:[email protected]
Printed in China
87.5 108 MHz
4. (Play/Pause) Button
15. BT (Blue Tooth) Indicator
16. Charging Indicator
Micro
on the supplied AC/USB Adaptor or any
Computer's USB Port.
3. Insert the AC/USB Adaptor to any wall outlet having AC 100-240V~, 50/60Hz.
4. During charging, the RED Charging Indicator on the rear of unit will light. When finished,
it will turned off.
NOTE:
This AC/USB Adaptor is intended to be correctly orientated in a vertical or floor mount position.
turned to Power Off (Standby) mode.
GENERAL OPERATION:
on the remote control
, “ ”will appear on the display.
EQ Presetting modes:
may erased.
the unit.
player.
rear
1 x AC/USB Adaptor (Input: AC 100-240V~, 50/60HZ; Output: DC
1 x USB Connection Cable
Jacks
5V, 1A)
BT (BULTOOTH) PARING AND PLAYBACK:
1. Power on the unit as previous procedures.
2. Press the MODE Button on the unit or Remote Control repeatedly until the “bLUE” appears
on the display and BT Indicator on the top of unit is blinking.
3. Turn on the BT function on the external BT device. Wait a few seconds until they are paired
(the BT Indicator stop blinking). Plays the music in the paired unit as usual. (Make sure the
volume level of the external BT device was set to high position).
4. During playback:
Press the VOL (Volume) + or – Buttons to adjust volume level.
Press the VOL -/ or VOL +/ Buttons on the unit or the / Buttons on the
remote control to skip tracks.
Press and hold the or Buttons on the remote control to fast searching desired section.
Press the (Play/Pause) Button to pause, press again to resume normal playback.
NOTES:
In first time use, pair the external BT device with the unit as below:
1. Power on the unit as previous procedures.
2. Press the MODE Button on the unit or Remote Control repeatedly until the “bLUE”
appears on the display and BT Indicator on the top of unit is blinking.
3. Power on the external BT player and enter to searching mode. Start pairing as the on screen
instructions on the external BT Player. After paired, the BT Indicator will stop blinking.
(For details pairing procedures, please refer to the user’s manual of your BT device.).
4. When the external BT player searched the unit, our model number “CR 4189BT” will
appear on the display of external BT device.
5. Pairing code “0000” may need to enter.
(Aux) mode, "LINE" will appears on the display and "AUX" Indicator on display will
light. Plays the music in the connected audio player as usual.
to Line
