Craig CHT978, Руководство пользователя, Страница: 10 / 19

2. Replace the battery by a new CR2025 button cell with the polarity “+” facing up as the
figure below and the rear of remote control.
3. Close the battery tray.
10
POWER SOURCE
Remote Control
●
First time using:
Remove and discard the insulation film as the figure on right.
●
If the battery is consumed, replace it as below:
1. Push and slide out the battery tray as the figure
below and the markings on the rear of the Remote Control.
BATTERY PRECAUTIONS
Follow these precautions when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in the
battery compartment, a reserved battery may cause damage to the device.
3. Do not mix different types of batteries together ( e.g: Alkaline and Carbon-zinc ) or old
batteries with fresh ones.
4. If the batteries in the device are consumed or the device is not to be used for a long
period of time, remove the batteries to prevent damage or injury from possible leakage.
5. Do not try to recharge the battery not intended to be recharged; it can overheat and
rupture. ( Follow battery manufacturer’s instructions.)
6. The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
7. Clean the battery contacts and also those of the device prior to battery installation.
8. The Remote Control supplied with a coin/button cell battery. If the coin button cell
battery is swallowed, it can cause severe internal burns in just 2 hours and can lead
to death.Keep new and used battery away from children. If the battery compartment
does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.