If Left and Right Earbuds was already paired to the same BT Device before.
Wait a few seconds, the earbuds will automatically pair to the external BT
Device.
3.
When paired:
You will hear an audible prompt from Earbuds to say “Connected”.
The Red Indicator on the other Earbud will also turn off, and the Blue
Indicator on it will start blink slowly.
4.
If pairing is complete you may now play music and answer calls with your
external BT Device.
5.
During playback:
Using the controls on the paired BT Device to adjust sound level; skip
tracks … as usual.
Or, press and hold either one of the Control Button on the Earbuds
approximately 1 second to skip tracks.
Press either one of Control Button on the Earbuds to pause, press again to
resume normal playback.
6.
If the Earbuds are paired to a Cell Phone and a call is incoming during an active
music session:
Press either one of the Control Button on the Earbuds then speak to the
Microphones to answer the call. When your call is complete, press the
button again to disconnect or end the phone call and resume to music
playback.
Or, press and hold the Control Button on the Earbud approximately 1 second
to decline the incoming call then resume to music playback.
Quick press either one of Control Button twice to redial the last telephone
number your cell phone called.
7.
When finished listening, press and hold either one of Control Button on the
Earbuds until you hear an audible prompt from Earbuds to say “Power off” to
shut off the Left and Right Earbuds.
Normal Operation after pairing:
1.
Power on the external BT Device and enter to BT playback mode.
2.
Power on the Left and Right Earbuds as previously instruction.
3.
Wait a few seconds, the earbud will automatically pair to the external BT Device.
(Some of cell phones may not have the automatically repairing function. Then
enter to the BT searching mode in your external BT Device again, start repairing
following the on screen instructions from your external BT Device.)
7
