9
The operation of any tiller can result in foreign objects thrown into the eyes,
which can result in severe eye damage. Always wear safety glasses or eye
shields before starting your tiller and while tilling. We recommend a wide vi-
sion safety mask over spec ta cles or standard safety glasses.
00155
depth_s
tak
e_
1
Nut
“B”
Nut
“A”
Outer Side
Shield
Depth Stake Pin
“RELEASED” Position
“Locked”
Po si tion
dep
th_s
tak
e_2
Transport Position
Deeptest Tilling
Depth Stake
Shallowest Tilling
(Cultivating)
handles_7
2
Drive Control Bar
“DISENGAGED”
Position
Shift Lever
Drive Control Bar
“ENGAGED” Position
HOW TO USE YOUR TILLER
Know how to operate all controls before
adding fuel and oil or attempting to start
engine.
STOPPING
TINES AND DRIVE
1. Release drive control bar to stop move-
ment.
2. Move shift lever to “N” (neutral) po-
si tion.
ENGINE
• Move throttle control to “STOP” po si tion.
If equipped with stop switch, move
switch to “STOP” position.
NOTE:
Never use choke to stop engine.
TINE OPERATION - WITH WHEEL
DRIVE
• Always release drive control bar be fore
moving shift lever into another po si tion.
• Tine movement is achieved by mov-
ing shift lever to ( ) till position and
en gag ing drive control bar.
FORWARD - WHEELS ONLY/TINES
STOPPED
• Release drive control bar and move shift
lever in di ca tor to “F” (forward) po si tion.
Engage drive control bar and tiller will
move forward.
REVERSE - WHEELS ONLY/TINES
STOPPED
1. DO NOT STAND DIRECTLY BEHIND
TILLER.
2. Release the drive control bar.
3. Move throttle control to “SLOW” po-
si tion.
4. Move shift lever indicator to “R” (re-
verse) position.
5. Hold drive control bar against the
han dle to start tiller movement.
HARD TO SHIFT GEARS
• Briefl y engage drive control bar and re-
lease or rock tiller forward and back ward
until are able to shift gears.
DEPTH STAKE
The depth stake can be raised or lowered
to allow you more versatile tilling and cul-
ti vat ing, or to more easily transport your
tiller.
TILLING
1. Release depth stake pin. Pull the
depth stake up for increased tilling
depth. Place depth stake pin in hole of
depth stake to lock in position.
2. Place shift lever indicator in till position.
3. Hold the drive control bar against the
han dle to start tilling movement. Tines
and wheels will both turn.
4. Move throttle control to “FAST” position
for deep tilling. To cultivate, throttle
con trol can be set at any desired
speed, de pend ing on how fast or slow
you wish to cultivate.
IMPORTANT:
Always release drive control
bar before moving shift lever into another
position.
