Craftsman CMXGGAS030731, Руководство оператора

Страница: 15 / 40

Not for
Reproduction
15
Maintenance
Service Air Cleaner
WARNING! Fuel and its vapors are extremely
flammable which could cause burns or fire
resulting in death or serious injury .
• Do not start and run engine with air filter removed .
Your engine will not run properly and may be damaged
if you run it with a dirty air filter . Clean or replace more
often if operating under dusty or dirty conditions .
1 . Loosen screws and remove air cleaner cover .
2 . Carefully remove cartridge from base .
3 . Install clean (or new) air cleaner assembly inside
cover . Dispose of old filter properly .
NOTICE If the filter is excessively dirty, replace with a new
filter . See Common Service Parts.
4 . Assemble air cleaner cover onto base and tighten
screws .
Service Spark Plug
Changing the spark plug will help your engine to start
easier and run better .
1 . Clean area around spark plug .
2 . Remove and inspect spark plug .
3 . Replace spark plug if electrodes are pitted, burned
or porcelain is cracked . Use the recommended
replacement spark plug . See
Common Service Parts .
4 . Check electrode gap with wire feeler gauge and reset
spark plug gap to recommended gap if necessary (see
Specifications ) .
5 . Install spark plug and tighten firmly .
Inspect Muffler and Spark Arrester
The engine exhaust muffler has a spark arrester screen .
Inspect the muffler for cracks, corrosion, or other damage .
Inspect spark arrester screen for damage or carbon
blockage . Clean if carbon blockage is found using brush
and commercial solvent or replace if damaged .
WARNING!
Contact with muffler area could
cause burns resulting in serious injury .
• Allow equipment to cool before servicing .
• It is a violation of California Public Resource Code,
Section 4442, to use or operate the engine on any forest-
covered, brush-covered, or grass-covered land unless
the exhaust system is equipped with a spark arrester, as
defined in Section 4442, maintained in effective working
order . Other states or federal jurisdictions may have
similar laws, reference Federal Regulation 36 CFR Part
261 .52 .
Replace spark arrester as follows:
1 . Remove four screws that connect heat shield to
muffler .
2 . Remove four screws that attach spark arrester screen .
3 . Obtain a replacement screen .
4 . Reattach screen and muffler guard .
Common Service Parts
Air Cleaner . . . . . . . . . . . . . . . . . . 491588 or 5043
Spark Plug . . . . . . . . . . . . . . . . . . . . . . . . . 795615
Engine Oil Bottle . . . . . . . . . . . . . . . . . . . . 100028
Synthetic Oil Bottle . . . . . . . . . . . . . . . . . . 100074
Fuel Stabilizer . . . . . . . . . . . . . 100120 or 100117
Contact an authorized service dealer or
BRIGGSandSTRATTON .COM for a full list of parts and
diagrams .
Muffler
Heatshield
Spark Arrester Screen
Screws
Screws
Screws
Cover
Filter
Base