8
Always wear eye protection. Any power
tool can throw foreign objects into your
eyes and cause permanent eye damage.
ALWAYS wear safety goggles (not glasses) that
comply with CAN/CSA Standard Z94.3 or ANSI
safety standard Z87.1. Everyday glasses have
only impact resistant lenses. They ARE NOT
safety glasses.
WARNING:
Glasses or goggles not in
compliance with ANSI Z87.1 could cause
serious injury when they break.
WARNING:
Always use a dust mask
when sanding or stripping paint.
WARNING:
Always use hearing
protection when using this tool, particularly
during extended periods of operation.
WARNING:
Always unplug the tool from
the power source before changing the roller,
sanding cylinder, accessory and when
cleaning the tool.
WARNING:
FIRE HAZARD:
Never use this tool near explosive
atmosphere or combustible materials.
If the
sandpaper hits a nail or any ferrous metal, a
spark could cause an explosion of fire.
WARNING:
FIRE HAZARD:
Collected sanding dust from sanding
coatings such as polyurethane, linseed oil
etc. can self-ignite.
To reduce the risk, clear
dust frequently from the sanding drum area and
from the surrounding work area. Strictly follow
the cleaning instruct ions in t he Owner’ s Manual
and coating manufacturer
’
s instructions.
WARNING:
Always use safety goggles
and a dust mask when using compressed air
to remove sanding dust from the tool.
WARNING:
Make sure the roller has
come to a full stop before taking your hands
off the tool.
If the roller is still moving, the tool
may move erratically and either damage the
workpiece or cause injury to the user.
Always place the R
est orer on its “ nose”
(balanced between the front handle and the
roller housing) when the tool is turned OFF and
when storing the tool. This will prevent
inadvertent loss of control if the tool is
accidentally turned ON. It will also avoid the
roller from developing a flat spot if the tool is
stored for long periods of time with weight on
the roller.
Always use two hands when operating the
Restorer. One hand should be used on the front
handle and the other hand should be placed on
the rear handle to operate the switches. Using
both hands will provide better control over the
tool.
Do not wear gloves, neckties or loose clothing.
Secure the workpiece. Use clamps or a vise to
hold the work when practical. It is safer than
using your hand and it frees both hands to
operate the tool.
Do not use this tool on material too small to be
securely held.
Make sure there are no nails or foreign objects
in the part of the workpiece to be sanded or
cleaned.
Always keep hands out of the path of the roller.
Avoid awkward hand positions where a sudden
slip could cause your hand to move into the path
of the roller.
SPECIFIC SAFETY RULES
!
!
!
!
SAVE THESE INSTRUCTIONS FOR REFERENCE
!
!
!
!
Do not plug in the Restorer
until you have read and understand this
Instruction Manual. Learn the tool’s
applications and limitations, as well as the
specific potential hazards related to this tool.
Following this rule will reduce the risk of electric
shock, fire, or serious injury.
Содержание CMXEQWX3232
Страница 16: ...EXPLODED VIEW 16 ...
