3
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
INSTRUCTIONS FOR SINGLE SUSPENSION BRACKET TRACTORS
REF
PART NO.
QTY.
DESCRIPTION
A
43350
2
Carriage Bolt, 3/8-16 x 1"
B
43062
2
Hex Bolt, 3/8-16 x 1-1/2"
C
44072
4
Whizlock Nut, 3/8"
D
44742
4
Plug
E
48866
2
Pivot Spacer
F
1643-60
2
Plastic Grip
NOTE:
Place cardboard or a mat on work surface to prevent
scratching of parts removed from carton and tractor.
STEP 1:
(SEE FIGURE 2)
Open parts bag labelled "
A
" and verify that all parts are
present.
STEP 2:
(SEE FIGURE 3)
•
Remove hood from tractor using instructions in your
tractor owner's manual. Place hood on cardboard or
on a mat to protect paint.
•
Remove the browning shield from the front of the
tractor as shown.
IMPORTANT:
Be sure to reattach
the browning shield
after bumper is installed.
REMOVE
BROWNING SHIELD
REMOVE
FRONT SCREWS
FIGURE 3
SHOWN FULL SIZE
PARTS BAG "A"
B
A
C
D
E
F
NOT SHOWN
FULL SIZE
FIGURE 2
CAUTION!
Muffler is hot! Allow engine to
cool down before proceeding with bumper
installation.
NOTE:
Right hand (RH) and left hand (LH) are
determined from the operator's position while seated on
the tractor.
