6
KNOW YOUR HAMMER DRILL
See Figure 1.
Before attempting to use your hammer drill, familiarize
yourself with all operating features and safety
requirements.
WARNING:
Carefully read through this entire
operator's manual before using your new hammer drill.
Pay close attention to the Rules For Safe Operation,
Warnings and Cautions. If you use your hammer drill
properly and only for what it is intended, you will enjoy
years of safe, reliable service.
WARNING
:
Exercise caution when using this tool.
Careless actions, for even a fraction of a second, can
result in serious personal injury.
KEYLESS CHUCK
Your hammer drill has a keyless chuck that allows you to
hand tighten or release drill bit in the chuck jaws.
SWITCH
To turn your hammer drill
ON
, depress the switch trigger.
Release switch trigger to turn your drill-driver
OFF
.
SWITCH LOCK
The switch trigger can be locked in the
OFF
position. This
feature helps reduce the possibility of accidental starting
when not in use.
FEATURES
VARIABLE SPEED
This tool has a variable speed switch that delivers higher
speed with increased trigger pressure. Speed is controlled
by the amount of switch trigger depression.
TWO SPEED GEAR TRAIN
Your hammer drill has a two speed gear train designed
for drilling or driving at
HI
or
LO
speeds. A slide switch is
located on top of your drill to select either
HI
or
LO
speed.
FORWARD/REVERSE SELECTOR
(DIRECTION OF ROTATION SELECTOR)
Your hammer drill has a forward/reverse selector located
above the switch trigger.
WRIST STRAP
A wrist strap is provided to reduce the chances of dropping
your hammer drill. Place one hand through the wrist strap
when carrying tool.
BIT STORAGE
When not in use, bits provided with your hammer drill can
be placed in the storage area located on the top of the
motor housing.
LEVEL
To keep drill bit level during drilling operations, a level is
located on the top and end of the motor housing.
AUXILIARY HANDLE
An auxiliary handle is packed with your for ease of
operation and to help prevent loss of control.
Chuck
13 mm (1/2 in.) Keyless
Motor
DC Motor 24 Volts
Gear Train
Two Speed
Switch
Variable Speed
No Load Speed
0-400 RPM (Low)
0-1400 RPM (High)
Hammer Speed
0-6,400 BPM (Low)
0-22,400 BPM (High)
Clutch
24 Positions
Maximum Torque
600 in.lb.
CHARGER
982035-001
Input
120 V, 60 Hz, AC only
Charging Voltage
9.6 - 24 Volts
Charge Rate
1 Hour
BATTERY PACK
982325-001
PRODUCT SPECIFICATIONS:
