manualshive.com logo in svg

Craftsman 944.364780, Руководство пользователя, Страница: 7 / 32

Поделиться
Скачать
Craftsman 944.364780 Скачать руководство пользователя страница 7

7

KNOW YOUR LAWN MOWER

READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OP ER AT ING YOUR 

LAWN MOWER.  Compare the illustrations with your lawn mower to familiarize yourself 

with the location of various controls and adjustments.  Save this manual for future refer-

ence.

These symbols may appear on your lawn mower or in literature supplied with the 

product.  Learn and understand their meaning.

OPERATION

Single point 

height adjuster

Operator presence control bar

Handle knob

MEETS CPSC SAFETY REQUIREMENTS

Sears rotary walk-behind power lawn mowers conform to the safety standards of the 

American National Standards Institute and the U.S. Consumer Product Safety Com mis sion.

Operator presence control bar  – 

must 

be held down to the handle to start the 

blade.  Release to stop the blade.

Throttle/engine control 

– used for start-

ing & stopping the engine; and allows 

you to select either FAST or SLOW engine 

speed.

Starter handle –

 used for starting engine.

Blade/brake control

 – used to engage 

the blade after the engine is started.

Drive control levers –

 used to engage 

power-pro pelled forward mo tion of mower.

Single point height adjuster

 – used to 

adjust cutting height of lawn mower.

Mulcher door – 

allows con ver sion to 

discharging or bagging operation.

Muffler

Grass 

catcher

Drive control levers

Throttle / Engine control

Spark plug

Engine oil cap 

with dipstick

Air filter

Gasoline filler cap

Housing

Mulcher door

Starter 

handle

Blade /

Brake

control

IMPORTANT: 

This lawn mower is shipped

WITHOUT OIL OR GASOLINE in the engine.

NOTE: 

Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. 

The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty.

Содержание 944.364780

































Отзывы:

Нет отзывов