Craftsman 944.364542 Скачать руководство пользователя страница 2

2

Warranty .................................................. 2
Safety Rules ......................................... 2-3
Product Spec i fi  

ca tions   ........................... 4

Assembly/Pre-Operation ...................... 4-5
Operation............................................ 6-10
Maintenance Schedule .......................... 11

Maintenance ..................................... 11-14
Service and Adjustments.................. 14-15
Storage ............................................. 16-17
Troubleshooting ................................ 18-19
Repair Parts...................................... 20-27
Sears Service .......................... Back Cover

TABLE OF CONTENTS

SAFETY RULES

I.  GENERAL OPERATION

•   Read, understand, and follow all 

in struc tions on the machine and in the 
manual(s) before starting. Be thor ough ly 
familiar with the controls and the proper 
use of the machine before starting.

•   Do not put hands or feet near or under 

rotating parts. Keep clear of the dis-
 charge opening at all times.

•   Only allow responsible individuals, who 

are familiar with the in struc tions, to 
operate the machine.

•   Clear the area of objects such as  rocks, 

toys, wire, bones, sticks, etc.,  which 
could be picked up and thrown by the 
blade.

•   Be sure the area is clear of other people 

before mowing. Stop ma chine if anyone 
enters the area.

IMPORTANT:  This cutting machine is capable of amputating hands and feet and throwing ob-
jects. Failure to observe the following safety instructions could result in serious injury or death.

  Look for this symbol to point out 

im por tant safety precautions. It means 
CAU TION!!!   BECOME ALERT!!!
YOUR SAFE TY IS INVOLVED.

  CAUTION:   Always disconnect spark 

plug wire and place wire where it cannot 
contact spark plug in order to prevent 
ac ci den tal starting when setting up, 
trans port ing, adjusting or making repairs.

  CAUTION:  Muffl er and other engine 

parts become extremely hot during 
operation and remain hot after engine has 
stopped. To avoid severe burns on contact, 
stay away from these areas.

LIMITED TWO YEAR WARRANTY ON CRAFTSMAN POWER MOWER
For two years from date of purchase Sears Canada, Inc. will repair or replace at Sears 
option free of charge parts which are defective as a result of material or workmanship.

COMMERCIAL OR RENTAL USE:
Warranty on Power Mower (Gas) will be ninety (90) days from date of purchase if used 
for commercial or rental purposes.

This Warranty does NOT cover:
•  Pre-delivery set-up.
•   Expendable items which become worn during normal use, such as rotary mower 

blades, blade adapters, belts, air clean ers and spark plug.

•   Repairs necessary because of operator abuse or neg li gence, including bent crank-
 shafts and the failure to main tain the equip ment according to the instructions con tained 
in the owner’s manual.

Warranty service is available by returning the Craftsman Power Mower to the nearest 
Sears Service Centre/Department in Canada. This warranty applies only while this prod-
uct is used in Canada.

This warranty is in addition to any statutory warranty and does not exclude or limit legal 
rights you may have but shall run con cur rent ly with applicable provincial legislation.  Fur-
thermore, some provinces do NOT allow limitation on how long an implied warranty will 
last so the above limitations may not apply to you.

Sears Canada, Inc., Toronto, Ontario M5B 2B8  

WARRANTY

Содержание 944.364542





























Отзывы: