manualshive.com logo in svg

Craftsman 944.363211, Руководство пользователя

Поделиться
Скачать
Craftsman 944.363211 Скачать руководство пользователя страница 15

15

STORAGE

Immediately prepare your lawn mower for 
storage at the end of the season or if the 
unit will not be used for 30 days or more.

LAWN MOWER

When lawn mower is to be stored for a 
period of time, clean it thor oughly, remove 
all dirt, grease, leaves, etc.  Store in a 
clean, dry area.
1.   Clean entire lawn mower (See 

“CLEANING” in the Maintenance sec-
tion of this manual).

2.   Lubricate as shown in the Main te nance 

section of this manual.

3.   Be sure that all nuts, bolts, screws, and 

pins are securely fas tened.  Inspect   
moving parts for damage, breakage 
and wear.  Replace if necessary.

4.   Touch up all rusted or chipped paint 

surfaces; sand lightly before painting.

HANDLE

You can fold your lawn mower handle for 
storage.
1.   Squeeze the bottom ends of the lower 

handle toward each other until the 
lower handle clears the handle bracket, 
then move handle forward.

2.   Loosen upper handle mounting bolts 

enough to allow upper handle to be 
folded back.

IMPORTANT:

  When folding the handle for 

storage or transportation, be sure to fold 
the handle as shown or you may damage 
the control cables.
•  When setting up your handle from the 

storage position, the lower han dle will au-
tomatically lock into the mow ing position. 

Lower handle

SQUEEZE

TO FOLD

ENGINE

FUEL SYS TEM
IMPORTANT

:  It is important to prevent 

gum deposits from forming in essential 
fuel system parts such as carburetor, fuel 
fi lter, fuel hose or tank during storage. 
Also, alcohol blended fuels (called gasohol 
or using ethanol or methanol) can attract 
moisture which leads to separation and 
formation of acids during storage. Acidic 
gas can damage the fuel system of an 
engine while in storage. 
•   Empty the fuel tank by starting the en-

gine and letting it run until the fuel lines 
and car bu re tor are empty.

•   Never use engine or carburetor cleaner 

prod ucts in the fuel tank or per ma nent 
damage may occur.

•   Use fresh fuel next season.

NOTE: 

 Fuel stabilizer is an acceptable 

al ter na tive in minimizing the formation 
of fuel gum deposits during stor age.  
Add stabilizer to gasoline in fuel tank or 
storage con tain er.  Always follow the mix 
ratio found on stabilizer container.  Run 
engine at least 10 min utes after adding 
stabilizer to allow the stabilizer to reach 
the car bu re tor.  Do not empty the gas tank 
and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace 
with clean engine oil.  (See “ENGINE” in 
the Maintenance section of this manual).

Mowing 
position

Operator presence 
control bar

           FOLD
        FORWARD
     FOR
  STORAGE

Upper handle

Lower 
handle

Содержание 944.363211





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды