background image

2

Warranty ............................................... 2
Safety Rules ......................................... 2
Assembly .............................................. 4
Operation .............................................. 6
Maintenance Schedule ........................ 10
Maintenance ......................................... 10

Product Specifications .......................... 11
Service and Adjustments ...................... 14
Storage ................................................. 15
Troubleshooting ................................... 17
Repair Parts .......................................... 19
Parts Ordering ...................... Back Cover

SAFETY RULES

WARRANTY

TABLE OF CONTENTS

TRAINING:

• Read this operator’s manual carefully.

Become familiar with the controls and
know how to operate your mower
properly. Learn how to quickly stop
mower.

• Do not allow children to use your mower.

Never allow adults to use mower without
proper instructions.

• Keep the area of operation clear of all

persons, especially small children and
pets.

• Use mower only as the manufacturer

intended and as described in this
manual.

• Do not operate mower if it has been

dropped or damaged in any manner.
Always have damage repaired before
using your mower.

• Do not use accessory attachments that

are not recommended by the manufac-
turer. Use of such attachments may be
hazardous.

• The blade turns when the engine is

running.

PREPARATION:

• Always thoroughly check the area to be

mowed and clear it of all stones, sticks,
wires, bones, and other foreign objects.
These objects will be thrown by the
blade and can cause severe injury.

LIMITED TWO (2) YEAR WARRANTY ON CRAFTSMAN POWER MOWER
For two (2) years from date of purchase Sears Canada, Inc. will repair or replace at Sears
option free of charge parts which are defective as a result of material or workmanship.
COMMERCIAL OR RENTAL USE:
Warranty on Power Mower (Gas) will be ninety (90) days from date of purchase if used for
commercial or rental purposes.
This Warranty does NOT cover:
1. Pre-delivery set-up.
2. Expendable items which become worn during normal use, such as rotary mower blades,

blade adapters, belts, filters and spark plugs.

3. Repairs necessary because of operator abuse or negligence, including bent crankshafts

and the failure to operate and maintain the equipment according to the instructions con-
tained in the Owner’s Manual.

Warranty service is available by returning the Craftsman Power Mower to the nearest Sears
Service Centre/Department in Canada. This warranty applies only while this product is in use
in Canada.
This warranty is in addition to any statutory warranty and does not exclude or limit legal rights
you may have but shall run concurrently with applicable provincial legislation.  Furthermore,
some provinces do NOT allow limitation on how long an implied warranty will last so the above
limitations may not apply to you.
SEARS CANADA, INC., TORONTO, ONTARIO M5B 2B8

Safety standards require operator
presence controls to minimize the
risk of injury. Your unit is equipped
with such controls. Do not attempt to
defeat the function of the operator
presence controls under any
circumstances.

27

MODEL NO. 143.006700

CRAFTSMAN 4-CYCLE ENGINE

KEY PART
NO. NO.

DESCRIPTION

— — 590702

Recoil Starter

  1

590599A

Spring Pin (Incl. 4)

  2

590600

Washer

  3

590696

Retainer

  4

590601

Washer

  5

590697

Brake Spring

  6

590698A

Starter Dog

  7

590699

Dog  Spring

  8

590700

Pulley & Rewind Spring Ass’y.

 11

590703

Starter Housing Ass’y. (40
degree grommet)

 12

590535

Starter Rope
( 98" X 9/64" dia.)

 13

590701

Starter Handle

KEY PART
NO. NO.

DESCRIPTION

— — 590739

Rewind Starter

3

590740

Retainer

6

590616

Starter Dog

7

590617

Dog Spring

8

590618A

Pulley & Rewind Spring Ass’y

11

590638

Starter Housing Ass’y
(40 degree grommet)

12

590535

Starter Rope
(Length 98" x 9/64" dia.)

13

590701

Starter Handle

14

590760

Spring Clip

Содержание 944.360300















Отзывы: