Craftsman 917.98636 Скачать руководство пользователя страница 14

14

SERVICE REMINDER/HOUR METER
Service reminder shows the total number of 
hours the engine has run and indicates when 
the engine or mower needs servicing. After 
every 50 hours of operation the oil can icon 
will stay on for 2 hours or until a manual reset 
occurs. To reset the display manually turn 
the ignition switch to the on position, then 
the off position five times (1 second on, 1 
second off). To service engine and mower, 
see the Maintenance section of this manual. 
NOTE: Service reminder runs when the 
ignition key is in any position but “STOP”.  
For accurate reading, be sure key remains 
in the “STOP” position when engine is not 
running.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL
The engine in your tractor  has been shipped 
from the factory already filled with sum mer 
weight oil.  
1.  Check engine oil with tractor on level 

ground.  

2.  Remove oil fill cap/dipstick and wipe 

clean, reinsert the dipstick and screw cap 
tight, wait for a few seconds, remove and 
read oil level.  If nec es sary, add oil until  
“FULL” mark on dipstick is reached.  Do 
not overfill.

•  For cold weather operation you should 

change oil for easier starting (See the oil 
viscosity chart in the Main te nance sec tion 
of this man u al).   

•  To change engine oil, see the Main te nance 

section in this manual.

ADD GASOLINE 

•  Fill fuel tank to bottom of filler neck. Do 

not overfill.  Use fresh, clean, regular 
gasoline with a minimum of 87 octane.  
Do not mix oil with gasoline.  Purchase 
fuel in quantities that can be used within 
30 days to ensure fuel freshness.

 CAUTION: Wipe off any spilled oil or fuel.  

Do not store, spill or use gasoline near an 
open flame.

IMPORTANT:  When operating in tempera-
tures below 32°F (0°C), use fresh, clean 
winter grade gasoline to help ensure good 
cold weather starting.

CAUTION:  Alcohol blended fuels (called 
gasohol or using ethanol or methanol) can 
attract moisture which leads to sep a ra tion 
and for ma tion of acids during storage.  Acidic 
gas can damage the fuel system of an engine 
while in storage.  To avoid engine problems, 
the fuel system should be emptied before 
stor age of 30 days or longer.  Drain the gas 
tank, start the engine and let it run until the 
fuel lines and carburetor are empty.  Use 
fresh fuel next season.  See Storage In struc-
 tions for additional information.  Never use 
engine or carburetor cleaner products in the 
fuel tank or permanent damage may occur.  
Fuel stabilizer is an acceptable alternative in 
minimizing the formation of fuel gum deposits 
during stor age.  Add stabilizer to gasoline in 
fuel tank or storage container.  Always follow 
the mix ratio found on stabilizer container.  
Run engine at least 10 minutes after adding 
stabilizer to allow the stabilizer to reach the 
carburetor.  Do not empty the gas tank and 
carburetor if using fuel stabilizer.

TO START ENGINE 

When starting the engine for the first time or 
if the engine has run out of fuel, it will take 
extra cranking time to move fuel from the 
tank to the engine.
1.  Ensure freewheel control is in the trans-

 mis sion en gaged position.

2.  Sit on seat in operating position, depress 

brake pedal and set parking brake.

3.  Move attachment clutch to dis en gaged 

position.

4.  Move throttle control to choke po si tion.
NOTE:  Before starting, read the warm and 
cold starting procedures below.
5.  Insert key into ignition and turn key 

clock wise to start position and release 
key as soon as engine starts. Do not run 
starter continuously for more than fifteen 
sec onds per minute. If the engine does 
not start after several attempts, move 
throt tle control to fast position, wait a 
few minutes and try again. If engine still 
does not start, move the throttle control 
back to the choke position and retry.

Содержание 917.98636





































Отзывы: