background image

2

TABLE OF CONTENTS

WARRANTY

Warranty ................................................ 2
Safety Rules .......................................... 3
Product Specifi cations ........................... 6
Assembly/Pre-Operation ....................... 8
Operation............................................. 12
Maintenance Schedule ........................ 19

Maintenance ........................................ 19
Service and Adjustments..................... 23
Storage ................................................ 29
Troubleshooting ................................... 30
Repair Parts......................................... 34
Sears Service ........................Back Cover

LIMITED WARRANTY ON CRAFTSMAN RIDING EQUIPMENT  
For two (2) years from the date of purchase, if this Craftsman Riding Equipment is 
maintained, lubricated and tuned up according to the instructions in the owner’s manual, 
Sears will repair or replace free of charge any parts that are found to be defective in 
material or workmanship according to the guidelines of coverage listed below. Sears will 
also provide free labor for these applicable warranted parts for the two full years. During 
the fi rst 30 days of purchase, there will be no charges to service the product at your 
home for issues covered by this warranty. (See exclusions below).   For your conve-
nience,  IN HOME warranty service will still be available after the fi rst 30 days of pur-
chase, but a trip charge will apply. This charge will be waived if the Crafts man product is 
dropped off at an authorized Sears location. For the nearest authorized Sears location, 
please call 1-800-4-MY-HOME®.   This warranty applies only while this product is within 
the United States.

This Warranty does not cover

:

•  Expendable items which become worn during normal use, including but not limited to 

blades, spark plugs, air cleaners, belts, and oil fi lters.

•  Standard Maintenance Servicing, oil changes,  or tune-ups
    Tire replacement or repair caused by punctures from outside objects, such as nails, 

thorns, stumps, or glass.

•  Repairs necessary because of operator abuse, including but not limited to, damage 

caused by towing objects beyond the capability of the riding equipment, impacting 
objects that bend the frame or crankshaft, or over-speeding the engine.

•  Repairs necessary because of operator negligence, including but not limited to, elec-

trical and mechanical damage caused by improper storage, failure to use the proper 
grade and amount of engine oil, failure to keep the deck clear of fl ammable debris, 
or failure to maintain the equipment according to the instructions contained in the 
owner’s manual.

•  Engine (fuel system) cleaning or repairs caused by fuel determined to be con tam i-

 nat ed or oxidized (stale).  In general, fuel should be used within 30 days of its pur-
chase date.

•  Normal deterioration and wear of the exterior fi nishes, or product label replacement.
•  Riding equipment used for commercial or rental purposes.
 
LIMITED WARRANTY ON BATTERY
For ninety (90) days from date of purchase, if any battery included with this riding equip-
ment proves defective in material or workmanship and our testing determines the battery 
will not hold a charge, Sears will replace the battery at no charge.  During the fi rst 30 
days of purchase, there will be no charges to replace the battery at your HOME.  After 
the fi rst 30 days, for your convenience, IN-HOME warranty service will still be avail-
able but a trip charge will apply.  This charge will be waived if the Craftsman product is 
dropped off at an authorized Sears location. For the nearest authorized Sears location, 
please call 1-800-4-MY-HOME®. 

This battery warranty applies only while this product is within the United States.

 
This warranty gives you specifi c legal rights, and you may also have other rights, which 
vary, from state to state.

Sears, Roebuck and Co.,Dept.817WA, Hoffman Estates, IL  60179

Содержание 917.27622



































Отзывы: