Craftsman 486.242221 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 20

Craftsman 486.242221 Скачать руководство пользователя страница 8

8

ASSEMBLY OF HOPPER BAG

STEP 14 - ASSEMBLE TUBES

•

Fit the ends of the two upper hopper tubes into the
ends of a rear hopper tube. Align the holes in the ends
of the tubes and secure them in place using two curved
head bolts (G) and nylock nuts (H). See figure 11.

• Fit the ends of the two lower hopper tubes into the

ends of a rear hopper tube. Align the holes in the ends
of the tubes and secure them in place using two curved
head bolts (G) and nylock nuts (H). See figure 11.

• Insert a clevis pin (O) from the outside into each lower

hopper tube and secure it with a hair cotter pin (S).
See figure 11.

NOTE:

Either side of the rear hopper tube can face up.

FIGURE 11

FIGURE 12

UPPER
HOPPER
TUBE

HOPPER
BAG
BOTTOM

STITCHED SLEEVE

FIGURE 13

LOWER HOPPER TUBE

HOPPER BAG
BOTTOM

UPPER HOPPER
TUBE

CLEVIS PIN (N)

HAIR COTTER
PIN (S)

UPPER
HOPPER
TUBE

NYLOCK
NUT (H)

CURVED HEAD
BOLT (G)

REAR
HOPPER
TUBE

LOWER
HOPPER TUBE

REAR
HOPPER
TUBE

CLEVIS PIN (O)

HAIR COTTER PIN (S)

NYLOCK
NUT (H)

CURVED HEAD
BOLT (G)

STEP 15 - ASSEMBLE TUBES TO BAG

• Unfold the hopper bag, reverse the fold of the mesh

wind screen and then lay the bag out flat with the wind

screen on top.

• Insert the ends of the assembled upper hopper tubes

down through the stitched sleeves in the sides of the
hopper bag and then slide the tubes back underneath
the wind screen. See figure 12.

• Place the assembled lower hopper tubes into the

bottom of the hopper bag and then slide the tubes to
the back of the bag. See figure 13.

• Attach the ends of the lower hopper tubes to the

inside

of the upper hopper tubes using two clevis pins

(N) inserted from the inside, and two hair cotter pins
(S). See figure 13.

«
...
6
7
8
9
10
...
»

Содержание 486.242221





















Отзывы:

Нет отзывов