background image

25

California / 

EPA Emission Control Warranty Statement

Your Warranty Rights and Obligations

The California Air Resources Board, The Environmental Protection Agency and Sears, Roebuck and Co., are pleased to
explain the emission control system warranty on your 2005 and later small off-road engine. In California and the 49 states,
new small off-road engines must be designed, built and equipped to meet stringent anti-smog standards. Sears must war-
rant the emission control system on your small off-road engine for the periods of time listed below provided there has been
no abuse, neglect or improper maintenance of your small off-road engine.

Your Emission control system may include parts such as the carburetor or fuel-injection system, the ignition system, and cat-
alytic converter. Also included may be hoses, belts, connectors and other emission-related assemblies.

Where a warrantable condition exists, Sears will repair your small off-road engine at no cost to you including diagnosis, parts
and labor.

The 2005 and later small off-road engines are warranted for two years. If any emission-related part on your engine is

defective, the part will be repaired or replaced by Sears.

Owner’s Warranty Responsibilities

• As the small off-road engine owner, you are responsible for the performance of the required maintenance listed in your

operator’s manual. Sears recommends that you retain all receipts covering maintenance on your small off-road engine, but
Sears cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled
maintenance.

• As the small off-road engine owner, you should however be aware that Sears may deny you warranty coverage if your small

off-road engine or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.

• You are responsible for presenting your small off-road engine to a Sears authorized service center as soon as problem

exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.

If you have any questions regarding your warranty rights and responsibilities, you should call 1-800-4-MY-HOME®.

Manufacturer’s Warranty Coverage

• The warranty period begins on the date the engine or equipment is delivered to the retail purchaser.

• The manufacturer warrants to the initial owner and each subsequent purchaser, that the engine is free from defects in mate-

rial and workmanship which cause the failure of a warranted part for a period of one year.

• Repair and replacement of warranted part will be performed at no charge to the owner at an authorized Sears service cen-

ter. For the nearest location please contact Sears at: 1-800-4-MY-HOME®.

• Any warranted part which is not scheduled for replacement, as required maintenance or which is scheduled only for regu-

lar inspection to the effect of “Repair or Replace as Necessary” is warranted for the period. Any warranted part which is
scheduled for replacement as required maintenance will be warranted for the period of time up to the first scheduled
replacement point for that part.

• The owner will not be charged for diagnostic labor which leads to the determination that a warranted part is defective if the

diagnostic work is performed at an authorized Sears Service Center.

• The manufacturer is liable for damages to other engine components caused by the failure of a warranted part still under

warranty.

• Failures caused by abuse, neglect or improper maintenance are not covered under warranty.

• The use of add-on or modified parts can be grounds for disallowing a warranty claim. The manufacturer is not liable to cover

failures of warranted parts caused by the use of add-on or modified parts.

• In order to file a claim, go to your nearest authorized Sears Service Center. Warranty service or repairs will be provided at

all authorized Sears Service Centers.

• Any manufacturer approved replacement part may be used in the performance of any warranty maintenance or repair of

emission related parts and will be provided without charge to the owner. Any replacement part that is equivalent in perform-
ance or durability may be used in non-warranty maintenance or repair and will not reduce the warranty obligations of the
manufacturer.

• The following components are included in the emission related warranty: engine, air filter, carburetor, primer, fuel lines, fuel

pick up/fuel filter, ignition module, spark plug and muffler.

Содержание 316.350840




























Отзывы: