8
9
FEATURES
KNOW YOUR DRILL
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
AUTO-SPINDLE LOCK
Your drill has an auto-spindle lock which makes installing
and removing bits much easier. When the switch trigger
is released and the motor comes to a complete stop, you
may hear a click. The click you hear indicates the auto-
spindle lock has engaged and locked the spindle. With
the spindle locked, you can easily install or remove bits by
turning the chuck sleeve with one hand. The auto-spindle
lock disengages when the motor starts again.
AUXILIARY HANDLE
Your drill is equipped with an auxiliary handle for ease of
operation and to prevent loss of control.
BIT STORAGE
Bits provided with the drill can be placed in the storage
area, located on the top of the drill.
CHARGER
The charger has a key-hole hanging feature for conve-
nient, space-saving storage. Screws should be installed
so that the center distance is 4-1/2 in.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
Your drill has a direction of rotation (forward/reverse)
selector located above the switch trigger for changing the
direction of bit rotation. Setting the switch trigger in the
OFF
(center lock) position helps reduce the possibility of
accidental starting when not in use.
KEYLESS CHUCK
The keyless chuck allows you to hand-tighten or release
the drill bit in the chuck jaws.
LEVELS
Levels are located on the top and end of the motor hous-
ing to help keep the drill bit level during use.
TORQUE ADJUSTMENT RING
Your drill has a 24-position clutch. The torque adjustment
ring can be turned to select the right amount of torque for
your application.
TWO-SPEED GEAR TRAIN
The two-speed gear train is designed for drilling or driving
at
LO (1)
and
HI (2)
speeds. A slide switch is located on
top of your drill for selecting either
LO (1)
or
HI (2)
speed.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with
decreased trigger pressure.
UNPACKING
This product has been shipped completely assembed.
n
Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
n
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
n
If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LIST
Drill-driver with Auxiliary Handle
Battery Packs (2)
Charger
Double-ended Screwdriver Bits (2)
Case
Operator’s Manual
ASSEMBLY
WARNING:
If any parts are missing do not operate
this tool until the missing parts are replaced. Failure
to do so could result in possible serious personal
injury.
WARNING:
Do not attempt to modify this tool
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
