r-------------GUARANTEE
-------------~
CRAFTSMAN
PORTABLE ELECTRIC TOOLS ARE UNCONDITIONALLY
GUARANTEED
FOR
ONE YEAR TO GIVE COMPLETE SATISFACTION OR RETURN FOR FREE REPLACEMENT.
THIS GUARANTEE SERVICE IS AVAILABLE BY SIMPLY RETURNING THE TOOL TO ANY
SEARS STORE.
.
SEARS, ROEBUCK AND CO. and SIMPSONS-SEARS LTD.
introduction
DOUBLEINSULATION
Double Insulation
is a concept
in safety,
replacing
the standard
grounded
supply system,
in electric
power tools. The construction
of a double insulated
tool affords
compatible
protection
to
a properly
grounded
tool without
the necessity
for using a
grounded
conductor,
The double insulation
system
eliminates
the need for the usual three wire ground-
ed power cord and grounded
cupply system. Wher-
ever there
is electric current
in the tool there
are
two complete
sets of insulation
to protect the user.
All exposed
metal
parts ore isolated
from the in-
ternol metal motor components
with protecting
in.
sulation.
The
lead
wires, switch,
etc.
with their
VARIABLESPEED
Electronic
trigger
control
switch delivers
higher
speed
and
higher
torque
with
increased
trigger
pressure. The speed of your sow is controlled
by the
- amount of switch trigger depres.sion; T-..igger switch
is double pole for added sofety and has sofety re-
lease
for added
utility.
Trigger
depression
disen-
gages .locking mechanism,.
The
following
guidelines
may be used
in deter-
mining correct speed for various applications:
LOW
speed is ideal for starting
cuts, sawing ceramics,
as well as other applications
where minimum speed
and power is required.
MEDIUM speed is suitable
functional
insulation
have the added
protection
of
non-conductive
sleeving or housings to complete the
double insulation
system.
SERVICING OF A TOOL WITH DOUBLE INSULA-
TION REQUIRES EXTREME CARE AND KNOWL.
EDGE OF THE SYSTEM AND SHOULD BE PER-
FORMED ONLY BY A QUALIFIED SERVICE TECH-
NICIAN.
FOR SERVICE WE SUGGEST YOU RE-
TURN
THE TOOL
TO YOUR
NEAREST SEARS
STORE FOR REPAIR WHICH
WILL
BE DONE
WITH
ORIGINAL
FACTORY
REPLACEMENT
PARTS.
for sawing ferrous metals,
plastics and laminates.
HIGH speed produces
best results in sawing wood
and n.on-ferrous
metals
such as aluminum
which
requfre high speeds and maximum
power.
AVOID RUNNING
AT SLOW SPEEDS FOR EX-
TENDED PERIOD OF TIME WHEN POSSIBLE. AT
SLOWER SPEEDS UNDER CONSTANT
PROLONG-
ED USAGE, THE UNIT MAY BECOME OVERHEAT-
ED. SHOULD THIS OCCUR: RUN TOOL WITH NO
LOAD AT MAXIMUM
SPEED TO COOL THE
UNIT. THIS WILL ACCELERATE COOLING PRO.
CESS.
RULES FOR SAFE OPERATION
~
I..
KNOW YOUR POWER TOOL -
Rl'ad owner's manual carefully, Learn its applications
and limitations
as well as the specific
poll'nUal hazards peculiar to this tool.
2.
GROUND ALL TOOLS -
UNLESS DOUBLE-INSULATED.
If tool is equipped
with three-prong
plug, it should
be plugged
inlo a thn'l'.hole
electrical
receptacle.
If adapter
is used to accommodate
two-prong receptacle,
the adapter
wire must be
attach.'d
to a known ground.
<Usually the screw securing
receptacle
cover plate). Never remove third prong,
:1
KEEP GUARDS IN PLACE and in working order.
4.
KEEP WORK AREA CLEAN. Cluttered
areas and benches invite accidents.
5.
AVOID DANGEROUS
ENVIRONMENT.
Don't use power tool in damp or wet locations. And keep work area well lit.
6.
KEEP "cHILDREN AWAY, All visitors should bl' kept safe distance
from work area.
7.
STORE IDLE TOOLS, When not in use, tools should be stored in dry, high or locked-up place-out
of reach of children.
8.
DON'T FORCE TOOL. It will do the job bl'tter
and safer at the rate for which it was designed.
9.
USE RIGHT TOOL. Don't forcl' small tool or attachment
10 do the job of a heavy duty tool.
10.
WEAR PROPER
APPAREL.
No loose clothing
or jewelry
to get caught
in moving parts. Rubber
gloves and footwear
are
rl'comm.'ndl'd
whl'n working outdoors.
II.
USE SAFETY
GLASSES
with most tools. Also face or dust mask if cutting operation
is dusty.
12.
DON'T ABUSE CORD, Nl'\'l'r carry tool by cord or yank it to disconnect
from receptacle.
Keep cord from heat, oil and sharp
edges.
13.
SECURE WORK. Usc clamps or a vise to hold work. It's safer than using your hand and it frees both hands to operate
tool.
14.
DON'T OVERREACH.
Kl'l'p proper
footing and balance at all times.
15.
MAINTAIN
TOOLS WITH CARE. Keep tools sharp at all times. and clean for best and safest performance.
Follow instruc-
lions for lubricating
and changing
accessories.
16.
DISCONNECT
TOOLS. Whl'n not in use, before sen'icing;
when changing
attachments.
blades,
bits, cutters,
etc.
17.
REMOVE
ADJUSTING
KEYS AND WRENCHES,
Form habit of checking to see that keys and adjusting
wrenches are remov-
ed from tool bdore
turl11ng it on.
18.
AVOID ACCIDENTAL
STARTING. Don't carry plugged.in
tOol with finger on switch.
COPYRIGHT.
1969.
BY
POWER
TOOL
INSTITUTE.
INC
ALL
RIGHTS
RESERVED
Page 2
