background image

14

MAINTENANCE

WARNING:

 

Do not at any time let brake fluids, 

gasoline, petroleum-based products, penetrating 
oils, etc., come in contact with plastic parts. 
Chemicals can damage, weaken or destroy plastic 
which may result in serious personal injury.

Only the parts shown on the parts list are intended to be  
repaired or replaced by the customer. All other parts 
should be replaced at a Sears Service Center.

REPLACING THE TRUCK BODY

The truck body can be removed and replaced with a new 
one. For instructions on removing and replacing the truck 
body, see

 Installing the Truck Antenna

.

The truck body may be removed and cleaned. Use only 
warm water and mild soap.

WARNING: 

When servicing, use only identical 

Craftsman replacement parts. Use of any other part 
may create a hazard or cause product damage.

WARNING:

 

Always wear safety goggles or safety 

glasses with side shields when using compressed air 
to clean products. If the operation is dusty, also wear 
a dust mask.

WARNING:

 

To avoid serious personal injury, always 

remove the battery pack from the product when 
cleaning or performing any maintenance.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most 
plastics are susceptible to damage from various types of 
commercial solvents and may be damaged by their use. 
Use clean cloths to remove dirt, dust, oil, grease, etc.

BATTERY PACK REMOvAL AND PREPARATION 
FOR RECYCLING

To preserve natural resources, please 
recycle or dispose of batteries 
 properly.
This product uses nickel- cadmium 
and lithium-ion batteries. Local, state 
or federal laws may prohibit disposal 
of batteries in ordinary trash.
Consult  your  local  waste  authority  for 
information  regarding available recycling 
and/or disposal options. 

WARNING: 

Upon removal, cover the battery 

pack’s terminals with heavy-duty adhesive tape. 
Do not attempt to destroy or disassemble battery 
pack or remove any of its components. Lithium-ion 
and nickel-cadmium batteries must be recycled or 
disposed of properly. Also, never touch both termi-
nals with metal objects and/or body parts as short 
circuit may result. Keep away from children. Failure 
to comply with these warnings could result in fire 
and/or serious injury.

Li - Ion

BATTERIES

This product will accept DieHard

®

 19.2 V lithium-ion bat-

tery packs and Craftsman 19.2 V nickel-cadmium battery 
packs.
The batteries for this product have been designed to provide 
maximum trouble-free life. However, like all batteries, they 
will eventually wear out. Do not disassemble battery pack 
and  attempt  to  replace  the  batteries.  Handling  of  these 
batteries, especially when wearing rings and jewelry, could 
result in a serious burn.
To obtain the longest possible battery life, we suggest the 
following:

For lithium-ion batteries:

  Remove the battery pack from the charger once it is 

fully charged and ready for use.

For battery pack storage longer than 30 days:

  Store the battery pack where the temperature is below 

80°F and away from moisture. 

  Store battery packs in a 30%-50% charged condition.

  Every six months of storage, charge the pack as 

normal.

For nickel-cadmium batteries:

  Remove the battery pack from the charger once it is 

fully charged and ready for use.

For battery pack storage longer than 30 days:

  Store the battery pack where the temperature is below 

80°F. 

  Store battery packs in a “discharged” condition.

Содержание 315.115940

















Отзывы: