Craftsman 315.114850, Руководство оператора

Страница: 8 / 76

8
SPECIFICATIONS
Chuck ...............................................................................................................................................................1/2 in. Keyless
Motor...................................................................................................................................................................19.2 Volt DC
Switch..............................................................................................................................................................Variable Speed
Gear Train ...................................................................................................................................................................2 Speed
No Load Speed ......................................................................................................................................... 0-400/0-1400/min.
Clutch .................................................................................................................................................................. 24 Positions
Charger Input ....................................................................................................................................... 120 V. 60 Hz, AC only
Charge Rate ................................................................................................................................................................. 1 Hour
Torque....................................................................................................................................................................... 410 in.lb.
FEATURES
KNOW YOUR DRILL-DRIVER
See Figure 1.
Before attempting to use your drill-driver, familiarize
yourself with all operating features and safety
requirements.
WARNING:
Do not allow familiarity with your drill-
driver to make you careless. Remember that a care-
less fraction of a second is sufficient to inflict severe
injury.
KEYLESS CHUCK
Your drill-driver has a keyless chuck that allows you to
hand tighten or release drill bit in the chuck jaws.
SWITCH
To turn your drill-driver ON, depress the switch trigger.
Release switch trigger to turn your drill-driver OFF.
SWITCH LOCK
The switch trigger can be locked in the OFF position. This
feature helps reduce the possibility of accidental starting
when not in use.
VARIABLE SPEED
This tool has a variable speed switch that delivers higher
speed with increased trigger pressure. Speed is controlled
by the amount of switch trigger depression.
TWO SPEED GEAR TRAIN
Your drill-driver has a two speed gear train designed for
drilling or driving at HI or LO speeds. A slide switch is
located on top of your drill to select either HI or LO speed.
FORWARD/REVERSE SELECTOR
(DIRECTION OF ROTATION SELECTOR)
Your drill-driver has a forward/reverse selector located
above the switch trigger.
WRIST STRAP
A wrist strap is provided to reduce the chances of drop-
ping your drill-driver. Place one hand through the wrist
strap when carrying tool.
BIT STORAGE
When not in use, bits provided with your drill-driver can
be placed in the storage area located on the bottom of
the motor housing.
LEVEL
To keep drill bit level during drilling operations, a level
is located on the top and end of the motor housing.
WARNING:
If any parts are missing, do not
operate your drill-driver until the missing parts are
replaced. Failure to do so could result in possible
serious personal injury.