Craftsman 247.377440 Скачать руководство пользователя страница 4

4

SAFETY INSTRUCTIONS

• 

If the equipment should start to vibrate abnormally, stop the engine and 
check immediately for the cause. Vibration is generally a warning of trouble.

• 

Shut the engine off and wait until the blade comes to a complete stop before 
removing the grass catcher or unclogging the chute. The cutting blade 
continues to rotate for a few seconds after the blade control is released. 
Never place any part of the body in the blade area until you are sure the 
blade has stopped rotating.

• 

Never operate mower without proper trail shield, discharge cover, grass 
catcher, blade control handle or other safety protective devices in place and 
working. Never operate mower with damaged safety devices. Failure to do 
so can result in personal injury.

• 

Muffler and engine become hot and can cause a burn. Do not touch.

• 

Never attempt to make a wheel or cutting height adjustment while the 
engine is running.

• 

Only use parts and accessories made for this machine by the manufacturer as 
listed in the Parts pages of this Operator’s Manual. Failure to do so can result 
in personal injury.

• 

When starting engine, pull cord slowly until resistance is felt, then pull 
rapidly. Rapid retraction of starter cord (kickback) will pull hand and arm 
toward engine faster than you can let go. Broken bones, fractures, bruises or 
sprains could result.

• 

If situations occur which are not covered in this manual, use care and good 
judgement.

SLOPE OPERATION

Slopes are a major factor related to slip and fall accidents, which can result in severe 
injury. Operation on slopes requires extra caution. The machine is heavy and can 
speed up when going downhill. Be prepared to maintain control of the machine. 
If you feel uneasy on a slope, do not mow it. For your safety, use the slope gauge 
included as part of this manual to measure slopes before operating this machine on 
a sloped or hilly area. If the slope is greater than 15 degrees, do not mow it.

Do:

• 

Mow across the face of slopes; never up and down to avoid loss of control. 

• 

Exercise extreme caution when changing direction on slopes; turn uphill not 
down.

• 

Watch for holes, ruts, rocks, hidden objects, or bumps which can cause you 
to slip or trip. Tall grass can hide obstacles.

• 

Always be sure of your footing. A slip and fall can cause serious personal 
injury. If you feel you are losing your balance, release the blade control 
handle immediately and the blade will stop rotating within three (3) 
seconds.

Do Not:

• 

Do not mow near drop-offs, ditches or embankments, because you could 
lose your footing or balance.

• 

Do not mow slopes greater than 15 degrees as shown on the slope guide.

• 

Do not mow on wet grass. Unstable footing could cause slipping.

CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. 
Children are often attracted to the mower and the mowing activity. They do not 
understand the dangers. Never assume that children will remain where you last saw 
them.
• 

Keep children out of the mowing area and under watchful care of a 
responsible adult other than the operator.

• 

Be alert and turn mower off if a child enters the area.

• 

Before and while moving backwards, look behind and down for small 
children.

• 

Use extreme care when approaching blind corners, doorways, shrubs, trees, 
or other objects that may obscure your vision of a child who may run into the 
mower.

• 

Keep children away from hot or running engines. They can suffer burns from 
a hot muffler. 

• 

Never allow children under 14 years of age to operate this machine. Children 
14 and over should read and understand the instructions and safe operation 
practices in this manual and on the machine and be trained and supervised 
by an adult.

SERVICE

Safe Handling of Gasoline:

To avoid personal injury or property damage use extreme care in handling 
gasoline. Gasoline is extremely flammable and the vapors are explosive. 
Serious personal injury can occur when gasoline is spilled on yourself or your 
clothes which can ignite.  Wash your skin and change clothes immediately.

• 

Use only an approved gasoline container.

• 

Never fill containers inside a vehicle or on a truck or trailer bed with a plastic 
liner. Always place containers on the ground away from your vehicle before 
filling.

• 

Remove gas-powered equipment from the truck or trailer and refuel it on 
the ground. If this is not possible, then refuel such equipment on a trailer 
with a portable container, rather than from a gasoline dispenser nozzle.

• 

Keep the nozzle in contact with the rim of the fuel tank or container opening 
at all times until fueling is complete. Do not use a nozzle lock-open device.

• 

Extinguish all cigarettes, cigars, pipes and other sources  
of ignition.

• 

Never fuel machine indoors because flammable vapors will accumulate in 
the area.

• 

Never remove gas cap or add fuel while engine is hot or running.  Allow 
engine to cool at least two minutes before refueling.

• 

Never over-fill fuel tank. To allow for expansion of the fuel, do not fill above 
the bottom of the fuel tank neck.

• 

Replace gasoline cap and tighten securely.

• 

If gasoline is spilled, wipe it off the engine and equipment. Move machine to 
another area. Wait 5 minutes before starting engine.

Содержание 247.377440













































Отзывы: