8
ASSEMBLY
IMPORTANT:
This unit is shipped without gasoline or oil in the engine. Make sure
to service engine with gasoline and oil as instructed in the Engine
Manual before starting or running the machine.
NOTE:
Reference to right and left hand side of the Lawn Mower is observed from
the operating position.
OPENING CARTON
1.
Cut each corner of the carton vertically from top to bottom.
2.
Remove all loose parts.
3.
Remove loose packing material.
REMOVING UNIT FROM CARTON
1.
Lift unit from the rear to detach it from underlying carton material and roll unit
out of carton.
2.
Check carton thoroughly for any other loose parts.
Loose parts in carton
• Upper Handle Knobs with bolts/washers (Qty. 2)
• Lower Handle Knobs with bolts/washers (Qty. 2)
• Cable Fasten Hook (Qty. 2)
• Side Discharge Cover
• Side Discharge nuts/bolts (Qty. 2)
• Bottle of oil
• User Manual/Engine Manual
ASSEMBLY
Attach Handle
IMPORTANT:
Do not crimp the cables when assembling the handle.
1.
Stabilize the mower so it does not move. Attached the lower handles and secure
them using the star knobs, washers, and carriage bolts (Figure 2).
2.
Attach the upper handle
a. Secure the upper handle using the star knobs, washers, and carriage bolts
(Figure 3).
b. Use the cable clamps to secure the control cables to the upper and lower
handles (Figure 3).
IMPORTANT:
To reduce wear and allow for proper operation, make sure to leave
some slack in the upper portion of the cable.
Attach Starter Rope
3.
Position the starter rope.
a. Hold the blade control handle against the upper handle.
b. Slowly pull starter rope handle from engine and slip starter rope into the
rope guide.
Figure 2
Figure 2
Figure 4
b
a
