background image

 

 

About the Code Reader 

 

VEHICLES COVERED 

 

 

 

 

4 Craftsman 

14063 

 

VEHICLE EMISSION CONTROL INFORMATION

VEHICLE

MANUFACTURER

OBD II

CERTIFIED

ENGINE  FAMILY        EFN2.6YBT2BA
DISPLACEMENT                    2.6L

THIS VEHICLE CONFORMS TO U.S. EPA AND STATE
OF CALIFORNIA REGULATIONS APPLICABLE TO
1999 MODEL YEAR NEW TLEV PASSENGER CARS.

REFER TO SERVICE MANUAL FOR ADDITIONAL INFORMATION
TUNE-UP CONDITIONS:  NORMAL OPERATING ENGINE TEMPERATURE,
ACCESSORIES OFF, COOLING FAN OFF, TRANSMISSION IN NEUTRAL

SPARK PLUG

TYPE NGK BPRE-11

GAP:  1.1MM

CATALYST

EXHAUST EMISSIONS STANDARDS         STANDARD CATEGORY

CERTIFICATION
IN-USE

TLEV
TLEV INTERMEDIATE

OBD II

CERTIFIED

VEHICLES COVERED 

The Code Reader is designed to work on all OBD 2 compliant vehicles. 
All 1996 and newer vehicles (cars and light trucks) sold in the United 
States are OBD 2 compliant. This includes all Domestic, Asian and 
European vehicles. 

Some 1994 and 1995 vehicles are OBD 2 compliant. To find out if a 
1994 or 1995 vehicle is OBD 2 compliant, check the following: 

1.

 

The Vehicle Emissions Control Information (VECI) Label.

 This label 

is located under the hood or by the radiator of most vehicles. If the 
vehicle is OBD 2 compliant, the label will state “

OBD II Certified

.” 

2.

 

Government Regulations require that all 
OBD2 compliant vehicles must have a 
“common” sixteen-pin 

Data Link 

Connector (DLC)

Some 1994 and 1995 vehicles have 16-pin connectors but are not 
OBD2 compliant. Only those vehicles with a Vehicle Emissions 
Control Label stating “OBD II Certified” are OBD2 compliant. 

Data Link Connector (DLC) Location 

The 16-pin DLC is usually 
located under the instrument 
panel (dash), within 12 inches 
(300 mm) of center of the panel, 
on the driver’s side of most 
vehicles. It should be easily 
accessible and visible from a 
kneeling position outside the 
vehicle with the door open. 

On some Asian and European vehicles the DLC is located 
behind the “ashtray” (the ashtray must be removed to access it) 
or on the far left corner of the dash. If the DLC cannot be 
located, consult the vehicle’s service manual for the location. 

1 2 3 4 5 6 7 8

9 10111213141516

NEAR

CENTER

OF DASH

BEHIND

ASHTRAY

LEFT CORNER

OF DASH

Содержание 14063











Отзывы: