background image

Extension Cords

• Do not allow to be used as a toy. Close 

  attention is necessary when used by or 

  near children.

• To reduce the risk of injury from 

  accidental starting, unplug power cord 

  before changing or cleaning filter.

• Do not leave Wet/Dry Vac unattended 

  when plugged in.  Unplug from outlet 

  when not in use and before servicing.  

• Turn off Wet/Dry Vac before unplugging.

• Do not put any object into ventilation 

  openings. Do not vacuum with any 

  ventilation openings blocked; keep free of 

  dust, lint, hair or anything that may reduce 

  air flow.

• Keep hair, loose clothing, fingers, and all 

  parts of body away from openings and 

  moving parts.

• To reduce the risk of falls, use extra care 

  when cleaning on stairs.

When using as blower:

• Direct air discharge only at work area. 

• Do not use Wet/Dry Vac as a sprayer.

• Do not direct air at bystanders.

• Keep children away when blowing.

• Wear safety goggles.

3

Length of Extension Cord

110V-120V

   25 Feet 

 7.5 Meters

      50 Feet   

  15.25 Meters

     100 Feet 

   30.5 Meters

    150 Feet  

  45.7 Meters 

A.W.G Wire Size

Amps

0-6 

              18 

               16 

                 16 

                    14

 7-10 

                18 

                 16 

                   14 

                      12

 11-12                    16 

                   16 

                     14                          12

 13-16                    14 

                   12 

                          Not recommended

Observe the following warnings that
appear on the motor housing of your Vac:

  WARNING:  

            To reduce the risk of

electric shock - do not expose to rain -

store indoors.

DOUBLE INSULATED

GROUNDING NOT REQUIRED.

WHEN SERVICING USE ONLY

IDENTICAL REPLACEMENT PARTS.

WARNING:  

When using blower:

Wear safety goggles labeled “ANSI

Z87.1” on the package. Turn unit off

before setting on ground or releasing

grasp of handle. Electric shock could

occur if used on wet surfaces. Direct

tool discharge only at work area.

Do not direct discharge at bystanders.

Keep children away.

!

!

!

For your own safety, read and

understand owner's manual.

Do not allow unit to be in operation if 

  unattended.

Do not pick up hot ashes, coals,

toxic, flammable or other hazardous

materials.

Do not use around explosive liquids

or vapors.

WARNING

When using an extension cord with your Wet/Dry Vac refer to the following table to 

determine the required A.W.G. (American Wire Gauge) wire size.  Before using Wet/Dry Vac, 

make sure it is in good working condition, including power cord.  Also, make sure extension 

cord is in good working condition prior to use.  Make repairs or replacements before using 

the vacuum cleaner.  Only use extension cords that are rated for outdoor use.

Содержание 125.17608
















Отзывы: