background image

page 11

13. Testing Your Fan.

12. Smart WiFi Remote Control (Optional).

To enjoy all the potential of your new 
device, you will need to download the 
Craftmade  Smart app, available on the Google 
Play Store and Apple App Store, or use the QR 
code to download the app.

Once you download the app, register new 
account and password.

NOTE:

 Please keep this account information. 

You will use this account when you connect with 
your smart speaker. 

When you log into the main page you will see 
the ‘ 

+

 ‘ on the right side of the top space. You 

will see the add a new device screen, then 
choose fan. Follow the configuration Wi-Fi 
process to continue pairings. 

After the paring process with Wi-Fi receiver, you 
can control the fan speed and light functions on 
the app. If you cannot find the fan, please see 
“Help”  section on the add a new device screen.

or

It is recommended that you test fan before finalizing installation. 
Restore power from circuit box and wall switch (if applicable). Test fan 
speeds with the different fan speed buttons (

I - VI

) on remote control. 

Test the light ON/OFF function by pressing the         button; test the 
dimmer function by pressing the         button and holding it down for 
up to 5 seconds. If the remote control operates all of the functions of 
the fan, battery has been installed correctly. If the remote control do 
(does) not operate all of the fan functions, refer to "Troubleshooting" 
section to solve any issues before contacting Customer Service.

Fan 

must

 be on LOW 

before

 setting the fan in reverse. Use          button 

to recirculate air depending on the season. A ceiling fan will allow you 
to raise your thermostat setting in summer and lower your thermostat 
setting in winter without feeling a difference in your comfort.

NOTE

: If the remote control interferes with other appliances, activate a 

new code on the remote control by 

turning the power off first

. Go back 

to the instructions for the SET button in Section 10 (page 9).

IMPORTANT

: Remote control must be synchronized with fan in order to 

properly function.

I

I I

IV

VI

I I I

V

Содержание Pursuit PUR54













Отзывы: