9. Light Kit Assembly. (cont).
Remove 1 screw from motor plate on
underside of motor housing and partially
loosen the other 2 screws.
Connect
WHITE
wire from motor housing to
WHITE
wire from light kit fitter. Connect
BLACK
wire from motor housing to
BLACK
wire from
light kit fitter. Be sure molex connections snap
together securely.
Align slotted holes in light kit fitter with
loosened screws in motor plate. Twist light kit
fitter to lock. Re-insert screw that was
previously removed and securely tighten all 3
screws with Phillips screwdriver.
Install 3 candelabra base 4 watt LED bulbs
(included).
Important
: When replacing bulbs, please allow
glass shade cage, glass shade, light kit fitter and
bulb(s) to cool down before touching them.
Re-attach the glass shade and glass shade cage
to the light kit fitter using the rubber washer,
hex nut and finial that were prevously removed.
Do NOT overtighten finial as glass may crack or
break.
motor
plate
molex
connections
motor plate
screw
light kit
fitter
finial
hex nut
rubber washer
glass
shade
cage
glass
shade
light kit
fitter
page 8
