background image

12. Smart Ceiling Fan WiFi Remote Control (Optional).

To enjoy all the potential of your new device, you 
will need to download the Craftmade Smart app, 
available on the Google Play Store and Apple App 
Store, or use the QR code to download the app. 

Once you download the app, register new account 
and password.

NOTE:

 Please keep this account information. You 

will use this account when you connect with your 
smart speaker. 

When you log into the main page you will see 
the  +  on the right side of the top space. You will 
see the “add a new device” screen, then choose fan. 
Follow the configuration Wi-Fi process to continue 
pairings. 

After the paring process with Wi-Fi receiver, you can 
control the fan speed and light functions on the 
app. If you cannot find the device, please see “Help” 
on the add a new device screen.

page 12

13. Testing Your Fan.

It is recommended that you test fan before finalizing 
installation. Restore power from circuit box and wall switch (if 
applicable). Test fan speeds with the different fan speed buttons 
(

I - VI

) on remote control. Test the light ON/OFF function by 

pressing the         button; test the dimmer function by pressing 
the         button and holding it down for up to 5 seconds. If the 
remote control operates all of the functions of the fan, battery 
has been installed correctly. If the remote control do (does) not 
operate all of the fan functions, refer to "Troubleshooting" 
section to solve any issues before contacting Customer Service.

Fan 

must

 be on LOW 

before

 setting the fan in reverse. Use          

button to recirculate air depending on the season. A ceiling fan 
will allow you to raise your thermostat setting in summer and 
lower your thermostat setting in winter without feeling a 
difference in your comfort.

NOTE

: If the remote control interferes with other appliances, 

activate a new code on the remote control by 

turning the 

power off first

. Go back to the instructions for the SET button in 

Section 10 (page 10).

IMPORTANT

: Remote control must be synchronized with fan in 

order to properly function.

I

I I

IV

VI

I I I

V

Содержание Journey JOU64














Отзывы: