Using motor screws (S5) provided, line up holes from the blade arm
with the holes in the motor housing. Tighten screws securely.
Remove rubber shipping grommets
before attaching blade assembly.
Remove switch housing plate
cover by unscrewing the two set
screws and twisting the unit to
release the locking screws.
Position the switch housing plate
on the motor housing and thread
wires through the center and attach
securely using supplied screws.
Attach switch housing body to switch
housing plate and motor housing.
For blade assembly, position slot on
fan motor housing so that you can
access the screws
11
12
