Installing the Batteries and Setting the Time
a.
This Clock has two faces and each requires its own set of (2) AA 1.5V Batteries. These battery
housings are located on each side as shown in the figure below. By pulling down the access door, you can
install the batteries. Then simply push the access door back into place.
b.
The winding mechanism is accessed in the locations shown below (beneath the battery access doors). By
using the adjustments keys provided, simply place the key into the slot and set time. Remember, there
are two clocks and the movements are separate and each must be set individually.
AA
1.
5V
AA
1.
5V
AA
1.
5V
AA
1.
5V
