XII I II
IIIIV
VVI
VIIVII
IIX
X X
I
Fixture Head Brackets
TH011 Thermometer/Clock Assembly
Assembly:
1) Attach fixture arm to wall mounting bracket by aligning holes and securing with three
allen screws.
2) Position bracket to desired location on wall and mark spots on wall where the four
holes are located.
3) For assembly on concrete or cement wall, drill (D7mm X L30mm) size holes on wall
where you have marked the spots.
4) Insert plastic anchors into holes, ensuring each anchor is securely embedded into the
wall.
5) For assembly on wood surfaces, drill wall mount screw directly into wood surface,
while screwing backplate and arm to wall.
6) Attach fixture head to wall mount bracket by fitting fixture head brackets over fixture
arm and aligning holes together. Secure with the two machine thread screws.
Warning:
The mounting of this fixture must be secured directly to a wood stud or directly into cement
or concrete wall.
TEMPERATURE
F
C
-10
-10
0
10
20
30
40
50
-20
20
0
40
60
80
100
HUMIDITY
%
90
80
70
60
50
40
30
20
10
0
BARO
10
6
105
10
4
103
102
101
100
99
98
97
96
31
30
K P
A
120
29
Inc
hH
g
Plastic
Anchor
4 Pcs
Wall Mounting Screw 4 Pcs
Machine
Thread
2 Pcs
Key
2 Pcs
Double Sided Head 1 Pc
PARTS:
Step 1
Wood or
Concrete Wall
Plastic Anchor
Wall Mounting Screw
Fixture Arm
Replacing Batteries: Installed On Side of
Housing
Look for curled tab on side of housing. Pull
and slide tab downward to access battery
casing. Insert batteries matching the “-” and
“+” markings, as indicated on the inside of
the battery housing, to the markings located
on the battery. Replace battery cover by
sliding cover into place.
Step 2
Step 3
E3
E4
Fixture Arm 1 Pc
Step 1
Step 2
Wall Mounting Bracket
Fixture Arm
Machine Thread Screw
Wall Mounting
Bracket 1 Pc
Allen Screw 3 Pc
Allen Wrench 1 Pc