Craftex CX905, Руководство пользователя

Страница: 9 / 17

9
ASSEMBLY
Attach the eye shields to the mounting rods.
Now attach the mounting rods to the wheel
guards using hex bolts and washers
provided. See figue-2.
Figure-2 Installing the eye shield
SPARK DEFLECTOR
The CX905/CX906 comes with spark
deflectors installed on each wheel guard.
The spark deflector prevents sparks from
showering the top of the work-piece. The
spark deflector should be adjusted so that it
is within a distance of 1/8" - 1/4" with the
grinding wheel.
Figure-3 Spark deflector
TOOL REST
The tool rest supports the work-piece when
grinding hence it is important to adjust the
tool rest correctly.
The tool rest should be positioned at a
distance of 1/16" - 1/8" from the grinding
wheel. As the grinding wheel wears, and
the gap between the grinding wheel and
tool rest increases, adjust the tool rest
closer to the grinding wheel.
Figure-4 Tool rest
WARNING!
Do not grind without the tool rest in
place. The grinding wheel should be
positioned properly in place before
operation. Free hand grinding or large
gap between the tool rest and grinding
wheel increases the risk of kick back.