Craftex CX506, Руководство пользователя

Страница: 9 / 16

9
MOUNTING ON A
WORKBENCH
The CX506 features four pre-drilled holes
on its base which allow mounting the
sander to the workbench.
There are two ways to mount the sander
onto the workbench; through mount and
direct mount.
"Through Mount" is the strongest mounting
option where the holes are drilled all the
way through the workbench. Hex bolts,
washers and hex nuts are used to secure
the sander to the workbench. See figure-2.
Figure-2 Through Mount
"Direct Mount" is to simply secure the
sander to the workbench using lag screws.
See figure-3.
Figure-3 Direct Mount
SWITCH DISABLING KEY
The CX506 features a switch disabling key
which prevents from unauthorized use.
Figure-4 Switch disabling key removed
When the machine is not used for a longer
period of time, simply remove the switch
disabling key and the ON/OFF switch will
not work without it. To enable the switch,
insert the key back to its place and you will
then be able to turn ON the machine.