Craftex CT169N Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 15

Craftex CT169N Скачать руководство пользователя страница 12

12

SANDING BELT
REPLACEMENT

To remove and replace the sanding belt:

Make sure the switch is in the OFF position
and the cord is disconnected from the
power source.

Remove the belt guard by removing the
knob securing the belt cover. See figure-10.

Figure-10 Removing the sanding belt cover

Now, move the belt tension lever up as
shown in figure-11 to loosen the tension on
the belt.

Figure-11 Loosening the tension on the belt

Take the belt off the rollers and replace with
a new one.

Move the belt tension lever down to tension
the belt and reinstall the belt cover.

Make sure to perform belt tracking
adjustment on the when the new belt is
installed. For details see “BELT
TRACKING” page-9.

MAINTENANCE

During the life of your machine, you will
need to practice some regular maintenance
to keep your machine in peak performance
condition.

Check your machine routinely for damaged
or loose grinding wheel, worn power cord or
worn switch and any loose hardware.

The grinding wheel should be checked
regularly from any internal or external
damages.

The bearings are pre-lubricated and needs
no lubrication.

Clean the wood dust from the sanding belt
by using abrasive cleaner against the
sanding belt when the machine is moving.

WARNING

Turn the switch OFF and un-plug the cord
from the power source before installing,
servicing, or doing any adjustments.
Failure to do so may cause serious
personal injury.

«
...
10
11
12
13
14
...
»

Содержание CT169N
















Отзывы:

Нет отзывов