Craftex CT160, Руководство пользователя

Страница: 9 / 23

9
Installing the Bed Extension
The bed extension is supplied as optional
equipment (MODEL# CT160EXT). The
mini lathe has been factory drilled with
two holes at the end of the bed for
installing the bed extension. See Figure-5
Figure-5 Bed Installing Extension Holes
To install the bed extension, align the two
holes on the bed extension with the two
holes on the bed end. Tighten the bed
extension with two M8 screws.
It is necessary to make leveling
adjustment between the maintain bed and
the bed extension by using a straight
edge guide.
Installing / Removing Tailstock
Center
The tailstock quill has a taper hole into
which the tailstock center fits. Fit the
tailstock center firmly by hand. Clean the
tailstock center shank and the tailstock
quill hole before fitting.
To remove the tailstock center from the
tailstock quill, simply turn the quill
movement hand-wheel until the quill end
is nearly inside the tailstock. Then loosen
the quill fix lever and you can move the
quill in or out. See Figure-7
Figure-7 Installing / Removing tailstock
ASSEMBLY
Warning:
Disconnect the machine
from the power source before mounting
and removing headstock center.