background image

17

Craftex warrants every product to be free from defects in materials and agrees to correct such defects where applicable.
This warranty covers 

two years

 for parts and 90 days for labour (unless specified otherwise), to the original purchaser

from the date of purchase but does not apply to malfunctions arising directly or indirectly from misuse, abuse, improper
installation or assembly, negligence, accidents, repairs or alterations or lack of maintenance.

Proof of purchase is necessary

.

All warranty claims are subject to inspection of such products or part thereof and Craftex reserves the right
to inspect any returned item before a refund or replacement may be issued.
This warranty shall not apply to consumable products such as blades, bits, belts, cutters, chisels, punches etceteras.
Craftex shall in no event be liable for injuries, accidental or otherwise, death to persons or damage to
property or for incidental contingent, special or consequential damages arising from the use of our
products.

                           RETURNS, REPAIRS AND REPLACEMENTS

To return, repair, or replace a Craftex product, you must visit the appropriate Busy Bee Tools
showroom or call 1-800-461-BUSY. Craftex is a brand of equipment that is exclusive to Busy Bee
Tools.
For replacement parts directly from Busy Bee Tools, for this machine, please call 1-800-461-
BUSY (2879), and have your credit card and part number handy.

 

All returned merchandise will be subject to a minimum charge of 15% for re-stocking and
handling with the following qualifications.

 

Returns must be pre-authorized by us in writing.

 

We do not accept 

collect

 shipments.

 

Items returned for warranty purposes must be insured and shipped pre-paid to the nearest
warehouse (see locations on inside back cover of this manual).

 

Returns must be accompanied with a copy of your original invoice as proof of purchase.
Returns must be in an un-used condition and shipped in their original packaging a letter
explaining your reason for the return. Incurred shipping and handling charges are not
refundable.

 

Busy Bee will repair or replace the item at our discretion and subject to our inspection.

 

Repaired or replaced items will be returned to you pre-paid by our choice of carriers.

 

Busy Bee reserves the right to refuse reimbursement or repairs or replacement if a third party
without our prior authorization has carried out repairs to the item.

 

Repairs made by Busy Bee are warranted for 30 days on parts and labour.

 

Any unforeseen repair charges will be reported to you for acceptance prior to making the
repairs.

 

The Busy Bee Parts & Service Departments are fully equipped to do repairs on all products
purchased from us with the exception of some products that require the return to their
authorized repair depots. A Busy Bee representative will provide you with the necessary
information to have this done.

 

For faster service it is advisable to contact the nearest Busy Bee location for parts availability
prior to bringing your product in for repairs.

CRAFTEX 2 YEAR LIMITED WARRANTY

Содержание CT024N






















Отзывы: