Craftex CSX Series, Руководство пользователя

Страница: 9 / 13

9
If you are mounting the mounting bracket to
a framed wall, the bracket must be attached
to a support board that is wide enough to
be mounted on two wall studs and having
the capacity of holding the dust collector
with collection bag full of dust. Secure the
support board to the wall studs, using lag
screws. See figure-3.
Figure-3 Installing wall mounting bracket on
a support board on the wall studs
Once the mounting bracket is installed on
the wall, lift the dust collector up and hang it
on the bracket.
Install the adhesive foam strip (provided) on
the dust collector outlet port as shown in
figure-4.
Figure-4 Installing adhesive foam strip
Installing the dust collection bag and secure
it using bag clamp (provided). See figure-5.
Figure-5 Installing the collection bag