Craftex B2062L, Руководство пользователя, Страница: 4 / 30

4
B2062L 12” LEFT TILTING ARBOR TABLE SAW
SPECIFIC SAFETY INSTRUCTIONS
‰
NEVER attempt to remove jammed cutoff pieces until the saw blade has
come to a full stop.
‰
NEVER use a saw blade that has a.) Missing carbide teeth, b.) Loose
teeth, c.) Chipped or broken teeth.
‰
NEVER stand directly in line with the saw blade when feeding stock into
the saw.
‰
NEVER allow visitors or helpers to stand in line with the saw blade.
‰
NEVER allow anyone to “assist” you by holding your workpiece at the
outfeed end.
‰
NEVER attempt to cut stock “freehand”, always use the rip fence or mitre
gauge.
‰
NEVER use the Rip Fence and the Mitre Gauge together.
‰
ALWAYS make sure that the rip fence is properly squared to the saw
blade to prevent kickback.
‰
ALWAYS make sure that your saw is in a stable position. Cutting heavy,
long stock may alter the stability of the B2062L. In the event that this may
occur, the saw should be firmly bolted to the floor.
‰
ALWAYS be sure that the mobile base wheels are firmly locked before
turning the saw on.
‰
ALWAYS use an outfeed table or roller stand to support long pieces of
stock.
‰
ALWAYS use a feather board and/or hold-downs to support your
workpiece when necessary.
‰
ALWAYS turn the saw off in the event of a motor stall or blade jam before
attempting to remove the stock.
‰
ALWAYS use only those accessories designed specifically for the B2062L
Table Saw.