Craftex B1012, Руководство пользователя, Страница: 11 / 23

11
Adjusting the Band saw Blade
The band saw blade must run vertically true to prevent it from running off the
wheels.
Remove the upper wheel cover by removing
the two thumbscrews on either side of the
cover.
There are four Allen screws located around the
axle of the upper blade wheel. Adjusting these
will alter the horizontal and vertical position of
the upper wheel. The band saw blade must ride
on the center of both the upper and lower
wheels.
Blade Tension
The band saw blade must have enough tension on
it to remain on the center of the wheels and to cut
in a straight line.
With the upper wheel cover removed, a hex-bolt
will be seen on the upper portion of the saw frame.
Tightening or loosening this will alter the band saw
blade tension.