1. Installing the filament guide tube holder
Select the desired position for the tube holder along
the top of the printer. Keep in mind that the spool
holder must be installed directly next to it. Locate
the guide tube holder with a hex wrench.
2. Installing the filament guide tube
Insert one end of the filament guide tube into the
guide tube holder on top of the 3D printer extruder
housing.
3. Installing the filament spool holder
Use a hex wrench to install the filament spool holder
next to the filament guide tube holder.
4. Mounting the filament spool
Fit the filament spool onto the filament spool holder
so that the lead end keeps its course when the
filament is fed upwards into the guide tube holder.
5. Attaching the power cord
Ensure that the power switch on the CraftBot is set
to the OFF position.
Find and then insert the AC power cord into the
power input on the back of the CraftBot. Switch ON
your 3D Printer.
1.
2.
3.
4.
5.
WARNING!
For safety reasons please read the User Manual before using CraftBot for the first time.
You can find it on the enclosed pendrive or you can download it from www.craftbot.com.
Videos worth watching:
www.craftbot.com/flow-unboxing
www.craftbot.com/idex-calibration
QUICK START GUIDE
www.craftbot.com
