Crafco SS60-Diesel, Руководство пользователя

Страница: 33 / 119

Super Shot 60 Diesel Melter Part Manual
Chapter 5 Operating Instructions
©2016 by Crafco, Inc. All Rights Reserved
………………..…………………………………..….Operating Instructions 5-9
5.7 Dispensing the Material
Step Action
WARNING
Put on protective clothing, gloves, hard-soled shoes, and face shield or safety glasses
when operating or filling this machine. Read the entire manual before operating the
machine.
Never point the wand at any part of the body or at any other person. Hot material can
cause severe burns.
Important: Some difficulty may be encountered when starting up on cold days.
Although the wand is designed to heat the material all the way down to the tip, on cold
days you can place the tip of the wand under the lid to facilitate material melting in the
valve. Insert the wand tip for only a short time before proceeding.
1 When the material and hose have reached manufacture
r’s application temperature,
you are ready to dispense material.
2 Turn the pump speed control to the lowest setting by turning the speed control knob
fully clockwise.
3 Insert the wand tip under the lid, depress trigger on the wand and slowly increase
pump speed until the pump motor starts to turn.
4 Adjust the pump speed for the desired flow rate for the application. The rate of flow
may be varied while the pump is running.
Table 5-7 Dispensing the Material