Quick Start Guide
/
MBR1200B
©Cradlepoint. All Rights Reserved.
|
+1.855.813.3385
|
cradlepoint.com
2
GETTING STARTED
Setting Up the Router
+
Plug the power supply into an electrical outlet, connect the power supply
to the MBR
1200
B and switch the power to ‘on’.
+
Connect a USB or Express Card Wireless Broadband Data Modem with
Active Subscription, or a Cable, DSL, Satellite, T1, T3, Ethernet Modem.
HARDWARE
LED Indicators
Power
+ Green = On
+ No light = Not
receiving power
LAN
+ Solid = Connected
+ Blinking = Traffic activity
WAN
+ Solid (green) = Connected
+ Blinking (green) = Traffic
activity
USB Type A Modem Status
+ Solid (green) = Connected
+ Blinking (green) =
Connecting
Express Card Modem Status
+ Solid (green) = Connected
+ Blinking (green) =
Connecting
WPS
+ Solid = Active
+ Blinking = Setting
in progress
WiFi 2.4GHZ
+ Solid = On
+ Blinking = Traffic activity
3G/4G Modem Signal
Strength
+ Blinking = 1/2 bar
Failover LED
+ Off = Primary WAN
operating normally
+ Solid (green) = Secondary
WAN is in use
Attention LED
+ Amber = Attention. Check
for courtesy message.
+ No Light = Issues taken
care of.
+ Red = Device booting or
critical system error such
as “No WAN is available.”
